Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Enzoly
Enzoly
Here to help
Member since Oct 6, 2022
Jun 22 2023
Community Record
14
Posts
2
Kudos
2
Solutions
Badges
Jun 22 2023
2:24 PM
Hola amigos y profesionales, Tengo experiencia en switches meraki y el AP, pero sigo aprendiendo, aportando mis conocimientos y aprendiendo de ustedes. Saludos a todos.
... View more
Thank you all for the comments and the time invested. Thanks.
... View more
What happens if I buy the power of the phones? should it work?
... View more
Hello Brash But Cisco and Meraki are not the same, excuse my ignorance but supposedly it should be compatible if they are Cisco?
... View more
Hello. Configure the port to 100 Mbit because if I leave it automatic it does not connect. In addition, the phone does not turn on even though PoE is enabled. I have a meraki MR57 AP connected, and it works correctly, but I connect the phone and it doesn't want to turn on.
... View more
Hello Alemabrahao. I plugged the same phone into another port, but I throttled the connection to 100 mb and I see this now: UDLD had detected a TX/RX loop. After that, it disconnects the port and sends me the message: Very high proportion of CRC errors on port 12
... View more
After that, it disconnects the port and sends me the message:
... View more
Hello Alemabrahao. I plugged the same phone into another port, but I throttled the connection to 100 mb and I see this now: UDLD had detected a TX/RX loop
... View more
Hello. I have a problem of Very High proportion of CRC error when I connect a Cisco 7940 phone to my Meraki MS355-24, immediately the port is blocked. I changed several patch cords, but it doesn't work properly. Does anyone have any idea about this error? how can i solve it? Thank you
... View more
Labels:
- Labels:
-
Interfaces
-
Layer 2
Nov 9 2022
3:37 PM
Hello. I have a problem with the same error but when I connect a Cisco 7940 Series phone to my Meraki MS355-24 switch, when I connect the phone to the port, the port immediately blocks and I get the Very high proportion CRC error. I have already used several different cables, but I don't know what is causing the error. Thank you
... View more
Oct 7 2022
10:39 AM
1 Kudo
Gracias EJN por tu apoyo. Los equipos son Meraki MR57 son nuevos. Dentro de mi red no tengo DHCP, por eso me ha costado asignarle una IP al AP. Tuve que montar el rol de DHCP para que los equipos tomaran ip y despues se la cambie or otra IP que se le hiba asignar. Ya puede resolver. La idea era asignarle la direccion IP por medio del puerto... Muchas gracias por contestar...
... View more
Oct 6 2022
1:43 PM
Gracias EJN por contestar, La red usa VLAN entonces y no tengo DHCP en la red, entonces me toca asignarle la direccion IP de manera manual y eso lo que estoy tratando de hacer. No solo tengo los AP MR57 Meraki no tengo mas equipos.
... View more
Oct 6 2022
12:49 PM
Hola buenas tardes. Acabo de comprar 2 AP modelo MR57 y dentro de mi red no tengo configurado el DHCP por algunas razones, pero actualmente estoy tratando de asignarle una IP estatica a mi AP pero no puedo logar hacerlo. El procedimiento que estoy usando es el siguiente: MR - 10.128.128.126 In order to access this address, configure a device with the following IP settings, and then browse the address in a web browser. IP address: 10.128.128.125 mi computadora Subnet mask: 255.255.255.0 Tienes alguna idea o algun documento que me pueda servidor para este caso
... View more
Labels:
- Labels:
-
Wireless LAN MR
Oct 6 2022
12:40 PM
1 Kudo
Hola buenas tardes. Como estan todos.
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 5840 | Nov 10 2022 1:41 PM | |
| 2886 | Oct 7 2022 10:39 AM |
My Top Kudoed Posts
© 2024 Cisco Systems, Inc.
