Meraki

Community
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

About olly

Re: Creating a Site-to-Site VPN between MX100 and a Draytek 2820Vn

by in Security & SD-WAN
‎May 18 2018 8:09 AM
‎May 18 2018 8:09 AM
Thanks, they do match.  However, it's not performing as expected.   The VPN is connected and I can ping things at either end by IP or name.  From the Meraki end I can access server shares and remote desktop to stuff at the Draytek end.  From the Draytek end I can't access server shares or remote desktop to stuff at the Meraki end.   I've checked the gateway and DNS settings and they look correct.  Are you able to offer advice as to why traffic only seems to flow from Meraki to Draytek and not the other way round?   Thanks ... View more

Re: Creating a Site-to-Site VPN between MX100 and a Draytek 2820Vn

by in Security & SD-WAN
‎May 16 2018 4:16 AM
‎May 16 2018 4:16 AM
Thanks.  The phase settings matched, however I'd missed a tickbox on the Draytek Dial In settings. ... View more

Creating a Site-to-Site VPN between MX100 and a Draytek 2820Vn

by in Security & SD-WAN
‎May 16 2018 2:19 AM
‎May 16 2018 2:19 AM
Our main depot has migrated to an MX100 with hotspare on a BTnet leased line, however a couple of our smaller sites are remaining on their original connections without Meraki kit.  Therefore I'm trying to establish a site-to-site VPN between the MX100 and a Draytek 2820Vn.   I've found and followed a guide for configuring the VPN, however it won't establish: https://the-server.ninja/2015/02/11/configuring-a-draytek-to-meraki-lan-to-lan-vpn/   Unfortunately, there are no logs on the Draytek, however the Meraki logs are:   May 16 09:08:51 msg: phase1 negotiation failed. May 16 09:08:51 msg: failed to pre-process ph1 packet (side: 1, status 1). May 16 09:08:51 msg: failed to get valid proposal. May 16 09:08:51 msg: no suitable proposal found. May 16 09:08:47 msg: phase1 negotiation failed. May 16 09:08:47 msg: failed to pre-process ph1 packet (side: 1, status 1). May 16 09:08:47 msg: failed to get valid proposal. May 16 09:08:47 msg: no suitable proposal found. May 16 09:08:46 msg: phase1 negotiation failed due to send error. 7dd1fbe900107553:0000000000000000 May 16 09:08:46 msg: initiate new phase 1 negotiation: 194.xxx.xxx.xxx[500]<=>185.xxx.xxx.xxx[500] ... View more
© 2024 Cisco Systems, Inc.