DAAAARRRRKKKKKKK MODE PLEASE!! 😁 ... View more

Weird, the app says age is 4 years old, something smells fishy.  ... View more

AH! Meraki switch, yeap, missed that part.  ... View more

Semper Fi, (Pog here) thank you for your service. It was mentioned above but I use the switch to cycle the PoE ports we need to reboot...simple as it can be for now for me. ie..interface range, shut, no shut. Good luck! ... View more

 We use a Radius server for authentication on the main SSID, Mac filtering for two other SSID's via Active Directory, and standard WPA2 for the other SSID's. Then the SSID's are vlan tagged for subnetting and routing.  ... View more

We experienced this same issue (there are a couple other threads for this exact issue) and the upgrade to 28.7 fixed it for us. It is a known issue with the 28.6. ... View more

Yeap, the upgrade to 28.7.1 fixed it for us. ... View more

Did you find a solution that worked? Experiencing similar issues with some differences. MR46 on 28.7.1 Just curious, thanks.  ... View more

We typically won't upgrade if there are no current bugs/issues in the current configuration until the stable release has been out for at least 60 days with no major issues.  ... View more

Congrats on 5 years running! Glad the community is here and available for free! ... View more

Good to hear, I'll have to try to hard reset the device and see if it will get the new static IP and firmware upgrade pushed to it. It's just dead in the water right now. 🙄Thanks.  ... View more

FW is open for the AP MAC addr to reach Internet via the TCP/443 port (new with v28+). I tried changing from DHCP to a static address but it will not accept the change via the dashboard. I clicked save but it still show DHCP is assigned. I've cycled the switchport to no avail. Before the first auto firmware upgrade and up to about 12 hours after, it was connected to the dashboard. Just suddenly disconnected this morning but would still ping through the network. 🤔 ... View more

 Hello everyone, we have recently purchased (6) MR46 AP's and put one in testing. It automatically updated the firmware and then we began to experience the same issues listed. We have cycled the switchport but it has not come back up yet. We can ping it, but no response to dashboard. Is there an update for this issue or is everyone still just rolling back the firmware for the temporary fix because I scheduled the upgrade to MR 29.2. It said it upgraded but still will not reach the dashboard. I did read something about the firewall ports used for cloud access changed after 28.X upgrades, could that be an issue?         ... View more