You are absolutely correct. I was able to correct the static route via Postman. I think the issue may have been that I was not correctly I identifying the hubs. I just have to modify it to the python script.    Thanks a lot for your help on this! ... View more

It looks as if you are running this through the hub. I currently have multiple devices that are running as spokes going back to a "VPN concentrator" HUB at my data center. The spokes are advertising the local subnets back to the data center HUB.     I am also running a python script being that I have multiple locations that vary in IP scheme. Below are the results that I get.  ... View more

For the MX-65 device...under Site-to-Site VPN option, there is a section called VPN Settings. There you have the option to select 'Yes' or 'No' for the Use VPN option. Using the portal you can opt to select the to use VPN regardless if the subnet is local to the meraki device or is a static route that can be configured under the Addressing & VLANs section.    If you are trying to change the option to 'Yes' for Use VPN going through the API, it only allows you to change this option for locally connected subnets and not any static routes configured.    I was wondering if anyone an a workaround for automating changing the Use VPN for static routes.    ... View more