Meraki

Community

About CraigAP

MR86 antenna ports

by in Wireless
‎Oct 15 2024 9:47 AM
‎Oct 15 2024 9:47 AM
We are installing a few MR86's with 2 x MA-ANT-25s for pallet racking coverage. I'm aware the MR76's (which we've used before) have specific 2.4 and 5GHz ports on them but the MR86 doesn't. Does this mean w could connect one antenna to the top and bottom left and the other to the top and bottom right ports so the antennas are to the side, rather than being top and bottom of the AP? ... View more

Re: MR76 antennas

by in Wireless
‎Mar 2 2024 11:26 AM
‎Mar 2 2024 11:26 AM
Thanks Ryan, we have a few on order now to try out. ... View more

Re: MR76 antennas

by in Wireless
‎Feb 28 2024 11:10 PM
‎Feb 28 2024 11:10 PM
Thnaks Ryan. Are these antennas used in pairs due to only having 2 connections? ... View more

MR76 antennas

by in Wireless
‎Feb 28 2024 8:13 AM
‎Feb 28 2024 8:13 AM
We are installing MR86 with the Cisco AIR-ANT2513P4M for pallet racking and it works very well, however the client has a number of sites with shorter aisles that this antenna panel would be a massive overkill, not to mention cost! Are there any alternative panels that support dual band but with a lower gain? ... View more

MR76 with MA-ANT-21

by in Wireless
‎May 11 2022 2:15 PM
‎May 11 2022 2:15 PM
We have a couple of warehouse deployments with ceiling heights between 12M and 18M. Aisles are between 1.8M and 2.5M, with WiFi required at all heights. I'm proposing to do a survey with the MR76 and the MA-ANT-21 as the client only uses the 5GHz in the warehouse, so I will advise they disable the 2.4GHz radios on all APs. Should I be expecting any anomalies from the AP in this scenario or will it work fine? ... View more
© 2024 Cisco Systems, Inc.