Meraki

Ahmed_Fathy · ‎Oct 29 2023

Dear Philip Is the above solution still the only valid one or there is any better workaround without extra MX appliance?

Ahmed_Fathy · ‎Mar 6 2022

Is that mean we can use for ex MR33 in remote sites and MX-64 in HQ ? and is it available to use Z3 instead of MR33?

Ahmed_Fathy · ‎Mar 6 2022

Dears Thanks for your support to advise if I can use Meraki for L2 VPN or any workaround to be able to use same subnet and DHCP server in HQ to distribute IPs of same HQ subnet in remote offices too. Note: it tried DHCP relay but it is only transfer different subnet and i am not sure about passthrough mode if it is the solution for this request.

Ahmed_Fathy · ‎Dec 13 2021

Can I access MX local Mgmt page remotely through MPLS connected on MX LAN ports (ping works fine) or should the endpoint (ex: laptop, PC.....) used for Mgmt be directly connected and in the same LAN...….. or as long as there is a reachability to MX then i can access its local web Mgmt page? and if not,.... is there any workaround ? note: MPLS is reachable to MX through static route.

Meraki

Community

About Ahmed_Fathy

Ahmed_Fathy

Community Record

Re: Non-Meraki VPN peer + Meraki autoVPN - routing

Re: Meraki L2 VPN to use centralized DHCP server in all sites.

Meraki L2 VPN to use centralized DHCP server in all sites.

Access MX local Mgmt page through MPLS VPN remote site.