hey all,    I'm sure the solution to this is simple but i just cant find it.   we have 3 ms250's and a mx84 on our network.   Currently all 3 switches connect back to the MX on a single cable.  But we are experiencing ALLOT of bottle necks with all out internal traffic traveling over the network on a single 1g line.   My plan is to have our 24port MS250 act as our Core and server switch and the 2 48port switches be just for end users.   What I'd like to do is run 2 lines from the MX to the core and 4 lines from the core to SW1 and SW2 (2 lines each) that way no more than half our network traffic to the servers will be going through 1 switch at twice the speed.   Here's the Problem.  I have done extensive networking with HP Switches and this is a 2 min task per switch. But I cant for the life of me figure out what needs to be done to make this work properly with Meraki.     Please help 😞 ... View more