Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About MichaelvanBal
MichaelvanBal
Comes here often
Member since Apr 14, 2018
Apr 19 2018
Community Record
7
Posts
0
Kudos
0
Solutions
Badges
Apr 15 2018
11:25 PM
i now have Trunk port using native VLAN 1; allowed VLANs: 1,4,21-22,26,192 Access Point Lan Settings IP X.X.4.X Vlan 4
... View more
Apr 15 2018
1:06 PM
I have a Meraki AP with 3 SSID's with different Vlan (22 - 26 - 192) How do i need to setup the Meraki Switch (MS225-48LP) Port. Trunk / Access point (I assume Trunk) but then i do that I got no signal and AP will go down, any idea's how to setup the Switch port? PS: Our CISCO ASA will provide the VLAN's and this is working!
... View more
Apr 14 2018
2:52 PM
Does anyone has an example of connecting asa to merak with asa has the vlan interfaces?
... View more
Apr 14 2018
2:49 PM
Correct is an example of an other asa
... View more
Apr 14 2018
2:35 PM
I have enter in the LAN IP the ip address XXX.XXX.4.XXX vlan to 4 subnet 255.255.255.0 Gateway XXX.XXX.4.1 (ip address of the interface of the asa with vlan 4 setup) DNS XXX.XXX.4.XXX
... View more
Apr 14 2018
1:56 PM
Hi MRCUR thanks for your reply below asa interface (i have vlan 4 this is another vlan as example) and the meraki switch port
... View more
Apr 14 2018
1:24 PM
Hi Guys, I need some help im configuring a Cisco ASA in combination with Meraki Switch On the ASA i have configured some vlan interfaces for example vlan 4 (no dhcp) now i connect the interface vlan 4 to the switch port 1 in trunk mode native vlan 1 and allowed vlan 4. the switch is in static mode on the subnet of vlan 4 but i got no connection to the switch (switch down) what im i doing wrong?
... View more
© 2024 Cisco Systems, Inc.
