I have the Meraki MX67 Security appliance and I configured a port forwarding rule to allow a specific port to go to a specific client IP address. But I am unable to access this client remotely. When I am using the internal LAN IP and port number, it works. But when I try my WAN IP and Port number, it just spins and finally times out. I don't know what the issue is. This is my first go with Meraki products and I thought it would be easier and more secure than off the store items, but apparently its not. I tried setting up a Layer 3 rule, but that didn't work either. Then I tried a 1:1 NAT rule, but that didn't solve it either. I have been reading thru all the different pages that come up when I google this.  Hopefully someone here can tell me what I need to do to get this port open so I can access my device remotely. Thanks! ... View more

I have a MX67 and then 2 MR36 and I have a pair of separate networks for things to connect to. On both of them, I am getting this error message for every client. Client made a request to the DHCP server, but the DHCP server rejected the client's request.   I have done the factory reset on everything and I still getting this error. The devices (iPhones, iPads, etc.) will not reconnect back to the network until we retype in the password, even though it is a under the saved settings. Everything has been updated to the latest software. I did a Network Settings reset on the phones and still have issues. It seems like I can get connected to one of the MR36, but as a short time or if they roam and connect to another one and then roam back, I start getting these messages.   I do not know what could be causing this. I have called support and they have been having me try a whole bunch of things, but so far nothing has worked. I am hoping someone out there can help me with this as its getting frustrating having spent lots of money on these devices but they aren't working. ... View more