After ~ 3 hours on the phone with Meraki and sharing the information provided by @IDV , @Raphael, @dgander , @dade80vr  & @dade80vr we have a "bandage" to resolve this until an update to fix it is released.  I was informed that Meraki is aware of the issue and is working on a solution.  No ETA as to when the actual fix will be known.  Meraki also stated that this is only affecting MX84's.  I suspect it may affect other models as well that the setting listed below is available on.   Solution:  Disable Web Cache and reboot router. Security & SD-WAN -> SD-WAN & Traffic Shaping   Unfortunately a reboot is required for the change to take effect.   I hope this helps anyone currently having the issue.     ... View more

Yesterday it happened again on site-to-site VPN and Traffic Shapping rules. There is no announcement from Meraki about this issue. I tried the workaround presented by MrChips but did not work this time. Anyone have information regarding it?   Thanks. ... View more

I have tried today it is working fine. you can use Cisco GLCT to Uplink ports. ... View more

Hello WANKiller   And what if I want the vlans created on core pass over to the MS220 and then to a non-Meraki switch, assuming that the MS220 does not have any port assigned in the vlan that I want to pass? ... View more

Hi guys. I could not find a way to limit the number of sessions per user from the MX. Also, I noticed that when the Active Directory option is activated, the Access control and Splash page tabs disappear from the menu. Thanks for your comments. ... View more