About Ad0m

Ad0m · ‎12-23-2021

Hi Everyone. I currently have a MX68 setup with Meraki's client VPN. The VPN works as expected. Tunnels all traffic to our office and gives our office IP as a public IP. One of our customers requires us to VPN into their network to be able to access a certain Dev environment but they will only allow it from our office IP. When connecting to our VPN and then trying the customers VPN client, it drops our connection with the following error " You were disconnected because the PPP server is not responding" - It's kind of what I was expecting. Can any one suggest a solution? Thank you in advanced. -Adam

Ad0m · ‎11-15-2021

Hi Christian, I'm having this issue with a few of my devices. Did you manage to find a solution to the problem? I don't have direct access to troubleshoot the issue so any help would be appreciated. Cheers,

Ad0m · ‎11-11-2021

Cheers for your reply, The Guest WiFi belongs to the management company of the main building so I have no control over this. With regards to encouraging Our wifi, I think I'll write a script and deploy to all machines removing it from their preferred networks and then that should fail over to our main network. However this is only a minor inconvenience at the moment. My main issue is I want to deploy something shared on the network, so if they're compliant with geofencing but on the guest wifi, then it will just fail. I guess a work around is to simply put a check in place to detect what public IP address they're using and just end if not using ours.

Ad0m · ‎11-11-2021

Hi All, Does anyone know if there's a way of automatically applying a tag to a device, if the device is connected to our main office network. I want to deploy an app but only if the device is on our network. I'm aware of geofencing however the building were in also offers Guest wifi and for unknown reasons, some people decide to connect to this rather than our office WiFi. Our network consists of 1x Meraki MX68 2x Meraki MR36 Thanks in advanced

Ad0m · ‎08-03-2021

Hi Philip, Thank you for your reply, I understand you can have only one MDM solution in place. I have attempted to disabled the auto enrolment which I thought would work but that didn't help. I may be doing it wrong so any further help is appreciated. Thanks, Adam

Ad0m · ‎08-02-2021

Hi All, I am trying to deploy the Meraki Systems Manager profile to a test Windows 10 Laptop connected to our Active Directory. However it fails to connect with the following Error. If I remove the Active Directory connection and create a local account then the profile will install. On the flip side of it, if the Meraki Profile is setup and I try to reconnect the Laptop to our AD account, then I get the following error. I'm fairly sure it's because we have Intune enabled and there's a clash over which MDM service to use. I've tried to disable the intune MDM completely and also attempted to setup a restriction to disable auto enrolment based on OS being above Windows 8.1, However I still get the above errors. Any Help would be appreciated so that both the AD work profile and Meraki Profile can be setup at the same time. Thanks in advanced, Adam

Ad0m

Community Record

Badges

VPN to VPN connection

Re: Error when trying to install the meraki agent

Re: Tagging based on network

Tagging based on network

Re: Active Directory Profile and Meraki Profile

Active Directory Profile and Meraki Profile