Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About SLR
SLR
Building a reputation
Member since Apr 6, 2018
Sep 22 2020
NJ
Community Record
99
Posts
53
Kudos
1
Solution
Badges
May 22 2020
8:01 AM
I would say - try blocking it on the MX side and if you have any MR's on that side as well. See if you are able to see any active time once this is done for next reporting. We had a similar issue. This resolved.
... View more
May 22 2020
7:10 AM
Do you have it blocked on the MX and the MR devices if you have any? Router - Switch - Wireless access points
... View more
Feb 12 2020
12:40 PM
Have you reached out to support regarding the issues for on site visits by vendors? Try doing that and let me know what they recommend. I am curious.
... View more
Feb 12 2020
12:20 PM
I need in on any beta testing group for anyconnect support as we have been waiting forever since we first installed the devices into our org.
... View more
Feb 12 2020
12:18 PM
I wouldn't do that just yet. Our environment has repaired itself on its own. we moved everything from roaming to bridge mode. the phone issue is no longer a problem and we have wifi 6 enabled. The only issue we see are with Windows 7 devices - the drivers are too old for connecting to the access points for some devices. No new WIFI driver updates for a long time now. Also - when vendors come on site, if their WIFI drivers aren't updated by their IT, they cannot get on. I just patiently wait for news firmware upgrade and anyconnect support. we are in a much better place now than where we were originally.
... View more
Whatever wireless driver update applied is dated last 2015. Nothing more. Which sucks. Only way is to hardwire the clients so far.
... View more
With MR55 devices in place - wifi 6 enabled , we have a lot of windows 7 laptops which are experiencing slowness when connected wirelessly. I have updated their wireless drivers but I have a feeling that all drivers on the laptops would need to be updated. Anyone else seeing this problem and if so, what have you done to remediate?
... View more
Can you give an example of what the Group Policy would look like on the DC so I can pass it on to the infrastructure side? Would it look like this - Create a new GPO that is assigned/permissioned to the machines/users on the domain? I only ask as it has been a while since I have been on infrastructure GP DC side of things 🙂
... View more
Group policy on my domain controller correct? Not group policy on Meraki Dashboard.
... View more
I am looking to do the following below : our current setup is RADIUS Authentication with WPA2-Enterprise What we want to have happen… Person receives a computer from IT Assuming the computer has already been added to the Domain by one of our techs. Persons profile does NOT exist on the computer as they have never logged into it. They need to connect to the WIFI SSID before they try to login to the computer. They should be able to connect to WIFI with their ID and Password (this is not logging into the computer yet) Once connected to WIFI, they can login to the computer with their ID and password and the windows profile gets created. is this possible to do and if so how?
... View more
Jan 15 2020
5:45 AM
Will the 26.7 fix wifi on 5G and wifi 6 enabled cellular phones. We are seeing random disconnects on user phones with 5G and WIFI6 capabilities. It appears that the phone can't handle the connection and drops from time to time.
... View more
Jan 14 2020
4:53 PM
There is a known issue with the aps broadcasting wifi 6 even being in disabled mode on both radios. The firmware update is already out. Have you tried to update yet? Or is the newest firmware update causing you issues? Also, we put everything in bridge mode. Roaming just caused us widespread issues.
... View more
Dec 18 2019
12:01 PM
to confirm, you are recommending I put my guest wireless network on my LAN with dedicated VLAN?
... View more
Dec 18 2019
11:17 AM
so we re-enabled 802.11AX across entire network SSID/AP for both 2.4 and 5. Wifi 6 capable phone (Samsung galaxy 10+) is still having the same behavior when trying to send texts across different access points. meaning starting position would be at the datacenter ap - sends text (texts goes through) a few minutes later, walks upstairs to hr area ap - sends text (text goes through) a few minutes after that, walks back downstairs to the datacenter ap - sends text, text fails to send Only way text will send is if user manually disconnects and reconnect to datacenter ap we are on Meraki dhcp NAT for client IP assignment. can someone help me to understand the process of how each client on Meraki DHCP Nat is handled from AP to AP? Is the IP address supposed to change when I walk from one AP to another. How does the AP determine pass off? is it supposed to be a seamless hand off? How come it isn't? should our band selection be different? We currently have it set to dual band operation with steering
... View more
Dec 12 2019
9:18 AM
I would also like to see better features on the uplink tab. I want to be able to see if sites are maxing out uploads consistently. maybe have live data, then data previous day, 1 month, and 1 week for uplink traffic
... View more
Dec 12 2019
5:18 AM
Thank you! Would you advise that we have 26.4 on all 17 AP or just the problematic one for now?
... View more
Dec 11 2019
9:09 AM
Cisco AnyConnect Support for the MX's Topology snapshot history The ability to see what devices are connected into the ports of my MX devices (non Meraki) Confirmation that a device has successfully upgraded it's firmware or whether the firmware install has hung but appearing as been successfully completed Custom build reporting Alerting for WAN 1 and WAN 2 A color change to graphs/stats for summary/uplink tabs as it is very hard especially under the loss area to determine between the two Layer 7 firewall allow rules - would like to deny things but allow youtube most of my feature requests are pretty similar to everyone else's here. Top of the list is Cisco Anyconnect support and topology snapshot history
... View more
Dec 11 2019
6:48 AM
Also - I have been troubleshooting this issue with Meraki Support since November 22nd. How come no one mentioned to me anything about a possible condition bug? I find that super odd. Also "If it's only affecting one AP it could be that this one rebooted after disabling 11ax but the others haven't rebooted after Support applied the config." - If that is so, how come after it was disabled and ALL access points were rebooted, that there was only 1 AP that was affected?
... View more
Dec 10 2019
7:24 PM
After the configuration was applied on the backend in October by support, we rebooted all access points.
... View more
Dec 10 2019
5:56 AM
I had this issue with Twitch but then I was able to find the below information and it worked properly. Maybe for you it would be the same process? Twitch.TV Twitch's main website Online 68 ms API.Twitch.TV Twitch's external endpoint for data retrieval Online 57 ms TMI.Twitch.TV Chat user lists (if this is down, mod status may also be broken)
... View more
Dec 10 2019
5:50 AM
2 Kudos
we are currently on 26.6. we have the wifi 6 capabilities disabled on the backend for both 2.4 and 5GHZ across all APs and network. We did toggle the disable 802.11ax in the dashboard. We even created a new ssid. None of those options alleviated the issue and it is only isolated to one AP out of 17. The user affected by it considers it a high priority and we had been working with support since November. We have an RMA coming to us this week. 🙂 If that doesn't resolve the one AP issue, then we will wait for 26.7 and probably have Meraki support on the backend re-enable the wifi 6 capabilities on all MR55 devices in our network.
... View more
Dec 6 2019
11:14 AM
Well - that was short lived. To remount it, I needed to disconnect the cable. once I did that and the ap rebooted/grabbed the config again, it went back to the same behavior.
... View more
Dec 6 2019
10:49 AM
any idea what causes this? is Meraki aware of the issue? I wish there was a way to tell on the dashboard side whether a config is clean or not.
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 3126 | Jul 17 2019 12:08 PM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 11 | 37128 | |
| 11 | 69928 | |
| 4 | 45311 | |
| 3 | 5621 | |
| 3 | 37898 |
© 2024 Cisco Systems, Inc.
