It would be great if we can have Variables in settings. It would sooooo usefull to deploy subnets in retail wich IPs subnet contain a site number for exemple. But Variable must be usable in other settings, and when we create a network (it works for bulk creation) we only have to feed variables and it's done. Actually Subnets must be same or unique, but the MX IP is automatically choose by the dashboard (it would be great to be able to choose the IP like vlan.1 or vlan.254.
... View more
I figured I would give an update on how this upgrade and renewal. It was actually very easy. The license renewal for everything was a single dashboard key. I chose renewal from the drop down and enter the key. It showed all of my devices and included the new MX84. Here is the process I used. 1. Turned off old MX80 2. Removed MX80 from network 3. Used the dashboard renewal license and added it to my network. 4. Claimed the new MX84 and added to my network. 5. Plugged in the new MX84 and had to configure the WAN port for PPPOE I just used the management port and went to http:\\setup.meraki.com 6. Once that information was in the MX84 went online downloaded some firmware rebooted and started working. 7. All I had to do was configure the LAN ports on the MX84. There are a lot more ports than the MX80 had. I even used the sfp port to directly connect our other site. Now both sites have direct connections to the MX84.
... View more