A new client has a Cisco Meraki MX84 installed by a previous IT person. Now they want to implement VPN. I know how to do it (at least I think I do) but for some reason I can't figure why every time I go to save the config I get an error message that says - There were errors in saving this configuration: xx.xx.xx.xx is the primary IP address of Internet port 1 and cannot be forwarded. Currently when I go into Security & SD-WAN then Client VPN it's disabled. I enabled Client VPN server Accept the default/Example Subnet 192.168.3.0/24 which is unique and different than the current network For the DNS server I selected Specify nameservers and for Custom nameserver entered the domain server 192.168.1.x No WINS servers selected Entered Shared secret Authentication, selected Meraki Cloud Authentication Finally clicked Save at the bottom, then get the above error message mentioned at the top. I looked everywhere and there is no port forwarding selected. Am I missing something? BTW, I have worked with Cisco ASA before, but this is my first time with Cloud based. It looks simple enough (maybe too simple compared to CLI in Cisco ASA). I hope someone can help. Thanks in advance.
... View more