Awesome, thank you! ... View more

I am having the same issue.  College campus, each building is basically a network.  I am only seeing the issue on stacked switches and the issue only shows up on the switches in the stack that don't have the uplink.  For instance, I have 4 switches in a stack, switch 1 has the fiber uplink and 2, 3 and 4 are using switch 1's uplink.  2, 3, and 4 have a DNS Misconfig error and won't forward packets.  Switch 1 isn't reporting the error.  Having this issue across 8 buildings/networks.  At my science center, I have 46 switches but only two stacks, a stack of 2 switches and a stack of 6 switches.  Switch 1 in each stack has the uplink and is fine but the others are error'd out.  Also, the other 38 switches have no errors, every switch in the building goes back to a Cisco 9500.   Did you find a solution to your issue?  ... View more

I have tried that.  I am having the same issue on an MX68.  It will pull an address from the DHCP pool but it will not hold the IP of a reservation from DHCP.  I can't even set a static IP on the device.   Same with the switches.  Right now they are both set to static IP's but still pulling an IP from a completely different vlan and ignoring the static setting. ... View more

Everything is set as a trunk port.  No native vlan.  I have tried setting the native vlan to 254, which is the meraki management vlan but it didn't help.   I have 20 other Meraki switches that are working as expected and they are all connected to trunk ports with no native vlan. ... View more