About Raz

Raz · ‎11-21-2021

As of today, I unplugged my meraki go setup GX20&GR10 and went back to my >8 years old TP-Link running OpenWRT that has never let me down. I've had enough restarting and reseting and changing networks in my app just because my devices keep losing internet connection and either not receiving an IP at all or getting stuck with self assigned IP. At some point, I even thought that my macbook pros are to blame, and I tried every solution I could find online, but with no result. And I keep losing my internet connection also on my iPhones, my iPad and my wife's Samsung smartphone. Digging deeper into this issue I saw some topics online on meraki community saying they were able to address this issue by switching from mixed mode (that apparently meraki go is using by default) to WPA2 only. As I'm not able to access this option, and I'm tired of even bothering to try something else to make it work (spent too much hours of my life on this issue), my expensive meraki go appliance is going to stay in the box for a long time.

Raz · ‎04-01-2021

Any estimate before this becomes a feature? My need for this might force me to switch to another WAPs vendor for my setup, and give up Meraki Go, as I also want to benefit from the roaming feature between meshed APs. Also, any chance for port mirroring feature being available for Meraki Go switches? Thank you!

Raz · ‎03-21-2021

Hello @hidden0 Thanks for the reply! However, we are working to add the support for changing and updating firewall rules. Good to know! Can't wait for this to happen.

Raz · ‎03-21-2021

Hello @hidden0 Thanks for the reply! The GS product line of switches also does not support port mirroring. 😞 that's a bummer. I was actually planning to toss in a GS between AP and GX, but now I am considering another piece of equipment - maybe a Ubiquiti or a MikroTik - and I would like to know how this will affect my experience inside the app. Thanks for the suggestion about the IDS - it is definitely a solution - but right now it would be too much of investment for my setup (home network with WFH environment)

Raz · ‎03-17-2021

I was planning to buy a second GR10 for this specific purpose, but I couldn't find anywhere if this is supported or not. So I guess it isn't...

Raz · ‎03-17-2021

I bought the GX-20/GR-10 because I wanted to have different devices for routing and for WIFI, but I was also very enthusiastic about the firewall feature. Unfortunately there is no setting inside the app regarding FW - I want to be able to see the logs (and even export them for parsing) and to interact with the rules.

Raz · ‎03-17-2021

I would like to be able to attach my IDS sensor directly to one of the ports of my GX-20 so I can mirror the traffic from port 1, where I have the GR-10 AP attached.

Raz

Community Record

Badges

Possibility to enforce a certain security type for WIFI

Re: LAN port on a meshed Access Point to provide network access to non-wire...

Re: Firewall logs and rules on GX-20

Re: Port mirroring on GX-20

Re: LAN port on a meshed Access Point to provide network access to non-wire...

Firewall logs and rules on GX-20

Port mirroring on GX-20

Firewall logs and rules on GX-20