About chesterweirdo

chesterweirdo

I'm looking to enable some failover on our network. We have two ISP. Currently, the primary is in WAN1 and the secondary is in WAN 2. My understanding is that gives us failover if one of the lines drops. What it does not cover is a hardware failure in the MX84. My ISP's do not provide two links so I think currently if we have a hardware failure I will have to swap the WAN port on the primary Firewall with the secondary one. It's not automatic but will do. My plan was to enable Warm spare in the dashboard for the second Meraki with have. I assume I need a link cable between them both to keep the heartbeat. Does it matter which port I use. Will it then work if it fails over we just swap the WAN port cable over?

chesterweirdo · ‎10-28-2021

Has anyone managed to get Any Connect on the MX to auth using Radius? We are trying to use Free radius which we use for our Wifi without issue but cannot get it to work with Any connect. Any pointers would be great. Support say they can not help we see (214) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (214) Failed to authenticate the user (214) Login incorrect (No Auth-Type found: rejecting the user via Post-Auth-Type = Reject): in our radius logs

chesterweirdo · ‎05-09-2021

Why would remote sites be able to auto vpn in its current setup? They all are direct ip devices at the remote site.

chesterweirdo · ‎05-09-2021

But that would mean it would have to be in the public subnet. How would it then be able to see anything in the private?

chesterweirdo · ‎05-07-2021

We have a Vmx in aws in private subnet behind NAT gateway. It’s reporting that the NAT type is unfriendly. we have spun up a vmx in azure and we are trying to get the auto vpn to connect. the nat type on the azure box says friendly so that looks okay. what does not make sense is our remote sites that have direct Ip setup are connecting to the aws vmx. if it was an issue with NAt would they not connect? I can not find any docs on how to setup the vmx in a private subnet behind a nat gateway. can anyone help.

chesterweirdo · ‎01-29-2021

We are rolling out MX devices to local sites. Its working well but I want to get to the point that end users can do it. My issue is they have to log onto the local admin page to set the PPPoE username and password. We always use the same provider so actually it is always the same details. How does anyone else get around this

chesterweirdo

Community Record

Badges

Warm Spare for MX84

Any Connect Auth using Radius

Re: Azure vmx not connecting to AWS vmx.

Re: Azure vmx not connecting to AWS vmx.

Azure vmx not connecting to AWS vmx.

Local site PPPoE settings