I suggest you first put the ap in a network and just create a NAT mode WLAN. Then you can connect to that WLAN and go to 10.128.128.128 te configure the AP in survey mode.   The AP will reboot and then show the site_survey-macaddress SSID where you can once again join and login to the local page on 10.128.128.128. ... View more

Hello Sungod.   I am struggling to understand how to combine the "timespan" parameter and the right "polling" frequency to collect data from Meraki API. I am collecting the number of clients associated per Meraki Access Point or Network using the following URL:   https://api.meraki.com/api/v0/networks/MY_NETWORK/clients?perPage=1000&timespan=3600   In order to avoid the API Rate Limit I am collecting the result every hour using PRTG. The timespan used inside the URL is also 3600 seconds (1 hour). The problem is that the data is coming in a very inconsistent way.        Please, could you help me to understand how can I use the Meraki API timespan correctly ? What is the recommended time interval to collect the connected clients ?   Regards,           Regards, ... View more

Someone posted a link to the AutoVPN document, which seemed to not be relevant.. but it did have this snippet:   "Device-to-cloud communication is encrypted twice: once via Meraki proprietary encryption and again using TLS. "     https://meraki.cisco.com/lib/pdf/meraki_whitepaper_autovpn.pdf   I am presuming TLS over UDP port 7351 = DTLS... but would be nice to know for certain. ... View more