Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About ericliu
ericliu
Comes here often
Member since Mar 14, 2018
Jul 18 2018
Community Record
27
Posts
0
Kudos
0
Solutions
Badges
Jul 13 2018
6:40 AM
Does meraki support mac address bypass authentication? Does a ssid support both mac address authentication and 8021.x username and password authentication? That is, the 8021.x authentication with the mac address authentication priority. If I need both authentication methods, do I need to create the SSID separately? I remember that Cisco can implement two authentication methods in one ssid.
... View more
Jun 19 2018
12:18 AM
We have some devices connected to the MR52. The device displays online and the signal strength is also normal. However, the device cannot access the Internet or is very slow. Try the my.meraki.com tool to debug the problem. The connection is normal, but the speedtest speed is not displayed. Check the log to display Device has 802.11 disassociation, unknown reason, what does this log mean, the device is clearly connected ap, why show 802.11 disassociation
... View more
However, some computers are sometimes connected to 2.4g, sometimes 5g, and the computer's driver is not changed.
... View more
The computer supports 2.4g and 5g, why connection ap is not 5g first，thanks
... View more
May 21 2018
7:47 PM
but i see to channel width is also 80MHz on the Network-wide clients
... View more
May 21 2018
12:08 AM
I set the channel width to 20MHz in the 5G radio setting, but I see that the client connection is still using 80MHz for the 5g client connection. What is the reason for this?thanks
... View more
Ap power is automatic，about 8dbm to 20dbm
... View more
There is a total of 10 aps in this office network，Ap distance of about 10 meters
... View more
The AP used in wireless networks is mr52, but the utilization ratios of 2.4G and 5G channels are particularly high. Channels and power configurations are automatically configured using Meraki. Users report that the Internet connection is slow, but the wired network is normal. What are the tools? Or methods to optimize my wireless network? thanks
... View more
yes，I'm near ap，Very strong signal strength，About 30dBm
... View more
wired network ping gateway test
... View more
wireless ping gateway test
... View more
but my wired network is normal, the ping gateway is basically 1ms, the test laptop I use is connected to 5G, 802.11ac, the channel width is 80MHz, the gateway is my core switch, and Interference and channel utilization are very low. I have not yet found the cause of the problem. How can I troubleshoot this issue?
... View more
dear all I have a new office. The installed ap is all meraki mr52. I have a problem. The new office is not used yet. However, I found that the wireless is not stable. I use a laptop to ping the gateway and the internet. The delay will be high. Sometimes it will be 100-200ms, and it will jitter
... View more
dear Adam ，I tried to connect ap to other network environments, and the ap could not connect to meraki cloud, but when I connected meraki Cameras to the same network, meraki mv could connect meraki cloud. Is it a hardware issue for my ap device?
... View more
But the ap error is now as follows: Unreachable for translation missing: zh.datetime.distance_in_words.x_days，my network no limit ,and Firewall policies have been released ，ap can get the address by dhcp，but cannot connect meraki cloud
... View more
The firewall has permit the TCP/UDP port, but the problem still exists
... View more
dear all，our firewalls outbound traffic is permit ip any any , and i used command packet-tracer test，the udp 7351, tcp 80, tcp 7734, tcp 7752 ,udp 123 are all open， The problem still exists，the ap cannot download configuration； Your network(s) 199.231.78.0/24, 108.161.147.0/24, 64.62.142.12/32, 209.206.48.0/20 7351 UDP outbound Meraki cloud communication Access points, Cameras, MX Security Appliance, Phones, Switches 209.206.48.0/20 106.15.131.8/32 443 TCP inbound Meraki cloud communication, customer-hosted Scanning Push API server: *******:443 Access points Your network(s) 64.62.142.2/32, 108.161.147.0/24, 199.231.78.0/24, 209.206.48.0/20 80, 7734, 7752 TCP outbound Backup configuration downloads, Backup firmware downloads, Backup Meraki cloud communication, Throughput tests live tool Access points, Cameras, MX Security Appliance, Phones, Switches Your network(s) Any 123 UDP outbound NTP time synchronization Access points, Cameras, MX Security Appliance, Switches
... View more
The Internet exit is a Cisco ASA firewall. I don't know which settings the meraki cloud needs for our firewall. Which addresses and ports need to be permit?
... View more
i have ap，it cannot download the configuration file from the meraki cloud，the error message is as follow： Unable to fetch configuration This device is unable to fetch its configuration from the Meraki cloud. Please contact Meraki Support.
... View more
© 2024 Cisco Systems, Inc.
