Dear All,   I have MX250, how to configure this dual link. I do not want any load balancing. I have an organization and want to add this firewall into the same organization in a network.   Currently, client has one internet link and it is terminated on cisco router. Now client has order another internet link and MX250 firewall and planning to terminate two links on the MX250.    Client has now two links and two different subnets. How it can be configured on the same ssid to serve multiple vlans ? Guest SSID--vlan 15 and vlan 20. How it will tag both vlans on the same ssid ? Do I need to create another network in the same organization ? and map other vlan ?   Regards ... View more

Dear All,   I have MR84 with MA-ANT 25 to install.   I have an area of 80 meters, what If I put both antennas in opposite direction (One is in North direction, other is in south direction) and mount the Access point in the middle of area (40m) in order to cover both sides with one access point and two antennas. ... View more

Dear All,    I have a network in which I have MX100 and core switches. MX100 is connected to Internet on a fixed Public IP.   All the SVIs on Core switches   I have a default route towards MX100 and there is a VPN between MX and non meraki device from where all the subnets are getting the services.   I have one subnet 10.x.x.10/27 on Core switch and it has already a default rule towards MX100.   I want to allow only one IP for Internet rest everything should go locally/VPN.   How I can do this ? ... View more

Dear All,   I have  MX100 and an ADSL link of 100mbps with fixed IP. Need to terminate this link on Cisco meraki MX100. I am not able to find any proper documentation.   Can somebody assist me on this. ... View more