Meraki

alemabrahao · ‎Mar 31 2022

https://www.speedtest.net/about/knowledge/faq

alemabrahao · ‎Mar 31 2022

So, you should open a case with Meraki team support to check It. 🙂

alemabrahao · ‎Mar 31 2022

Nope, I'm rigth.

alemabrahao · ‎Mar 31 2022

Testing to the same server. Speedtest automatically selects a server to test to based on ping, but you can also select a server to test to.

alemabrahao · ‎Mar 31 2022

If the speed test is showing the WAN2 IP It's ok, all those tests are based on ICMP.

alemabrahao · ‎Mar 31 2022

No, ICMP, speed test servers with ICMP. 🙂

alemabrahao · ‎Mar 31 2022

Speed test is based on ICMP 🙂

alemabrahao · ‎Mar 31 2022

On speed test which IP is shown to you from wan1 or wan 2? Check It: https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Load_Balancing_and_Flow_Preferences#Load_Balancing

alemabrahao · ‎Mar 31 2022

I'm confused, because you sad "even if when I check public ip and speedtest.net its showing the wan2 details"

alemabrahao · ‎Mar 31 2022

@RaphaelL , I think that is not the case. check my answer above.

alemabrahao · ‎Mar 31 2022

If you are testing with ICMP it's normal, check the note:

alemabrahao · ‎Mar 31 2022

@LC_IT conseguiu resolver seu problema?

alemabrahao · ‎Mar 30 2022

It's my new data center 🙂

alemabrahao · ‎Mar 30 2022

In this case, IP SLA is the best way in my opinion.

alemabrahao · ‎Mar 30 2022

I assumed that the gateway for your local LAN is the switch core, right? What is de model of your switch? Maybe you can create a route map on this switch.

alemabrahao · ‎Mar 30 2022

Yes.

alemabrahao · ‎Mar 30 2022

Well, so It should be work, perform a packet capture on the dashboard to verify if you receive any answer.

alemabrahao · ‎Mar 30 2022

And make sure that your public IP is allowed to access port 1500 on your cloud service.

alemabrahao · ‎Mar 30 2022

Do you have how many WAN links? Try to create a flow preference using a preferred uplink:

alemabrahao · ‎Mar 30 2022

But, maybe you can request It to Meraki support: https://community.meraki.com/t5/Security-SD-WAN/Source-NAT-for-VPN-traffic-Branch-office/m-p/60789

alemabrahao · ‎Mar 30 2022

With Meraki It's not possible. 😕

alemabrahao · ‎Mar 30 2022

Well, I have checked, and you are right, now It is possible to change the password. Sorry for my mistake.

alemabrahao · ‎Mar 30 2022

No, I assumed that you are using Meraki Cloud Authentication. 😊 As far as I record the option to change the password is only for guest wifi users.

alemabrahao · ‎Mar 30 2022

Yes

alemabrahao · ‎Mar 30 2022

Yes, this is true. No, they can't change their passwords by themselves. 2FA is just to dashboard admin it is not applicable for guest users.

About alemabrahao

alemabrahao

Alessandro Abrahao

Community Record

Badges