SUCCESS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!   A MILLION THANK YOUS!!!!!       Here is the end result fix:     in Micro$oft NPS server removed MSCHAPv2  as an EAP type as suggested   changed DHCP to NAT mode: Use Meraki DHCP   on android device: EAP Method = PEAP Phase-2 Authentication = none CA Certificate = (unspecified) Identity = AD username  Anonymous Identity = Blank Password=Password   Thank you Phillip! hope this helps someone else !!! ... View more

ok at least now i'm getting a different error.. failed to obtain IP....     ... View more

Thank you.  Passed test in Meraki Dashboard SSID Access Configuration Test RADIUS : Completed testing to "192.168.xxx.xx:1812 for user"   Total APs:  8 APs passed:  3 APs failed:  0 APs unreachable:  5     All online access points successfully contacted the RADIUS server, however 5 access points were offline and could not be tested. RADIUS attributes used:  RADIUS attributes unused:  Framed-Protocol:PPP Service-Type:Framed-User MS-CHAP-Domain:DOMAIN NAME       Android clients still failing...   trying to verify Android config   no Win laptops available to test..     ... View more

Apologies it is on my SSID so i presume that means the WiFi configured for RADIUS:     SSID Access control Encryption                                                          802.1X with custom RADIUS Sign-on method                                                  None Bandwidth limit                                                   unlimited Client IP assignment                                          Local LAN Clients blocked from using LAN                         n/a Wired clients are part of Wi-Fi network              no VLAN tag                                                           xxx VPN                                                                   disabled     we are trying to set up a Staff SSID just like we have on our failing aging Cisco APs that uses the users AD credentials and password to access the network.         ... View more

So sorry for not providing more info, just at my wits end so i turned off all computers for the weekend.  here's the info:   Windows server 2008 NPS server; EAP-MSCHAP v2, PEAP Meraki configured WPA2-Enterprise with My Radius Server, no splash page RADIUS Server PASSES test on Meraki Dashboard  All clients get "password error" when trying to connect (Android or Win7 laptops)   any further coinfig i should send you?? ... View more

So sorry for not providing more info, just at my wits end so i turned off all computers for the weekend.  here's the info:   Windows server 2008 NPS server; EAP-MSCHAP v2, PEAP Meraki configured WPA2-Enterprise with My Radius Server, no splash page RADIUS Server PASSES test on Meraki Dashboard  All clients get "password error" when trying to connect (Android or Win7 laptops)   any further coinfig i should send you?? ... View more