Meraki

FariziAP · ‎Sep 3 2020

Greetings All, Thank you for all of your advices, After calling the Cisco Meraki TAC, This problem is solved by upgrading the MR firmware to MR 27.4, after that the MR46 successfully got IP from DHCP and broadcasting my office SSID. Cheers! Hope its helps.

FariziAP · ‎Aug 26 2020

Yes the port is fully up 1Gbps full duplex, The default Meraki setup SSID is already replaced by my Employye SSID, so it wont come up. On the AP dashboard my Employye SSID already been broadcasted, but still wont come up on the list of WiFi.

FariziAP · ‎Aug 26 2020

Yes its a new AP

FariziAP · ‎Aug 26 2020

Hello, i am new to cisco meraki. Currently i got a network like this MX450-->MS410-->>MS225-->>MR46 DHCP Pool on MS410 On MS225 ports : Port 1-10 : native vlan 42 (AP Management) allow vlan all Port Uplink : native vlan 38 (Switch Management) allow vlan all When i connect my laptop to port 1 on MS225, i got vlan 42 dhcp (10.200.42.0/23), and i am connected to internet. But when i connect MR46 to the same port, MR46 wont fetch DHCP from dhcp server and the LAN IP is stuck at 0.0.0.0 Can anyone help me? Thank you before.

Meraki

Community

About FariziAP

FariziAP

Community Record

Badges

Re: MR46 Wont Get DHCP IP, IP Stuck at 0.0.0.0

Re: MR46 Wont Get DHCP IP, IP Stuck at 0.0.0.0

Re: MR46 Wont Get DHCP IP, IP Stuck at 0.0.0.0

MR46 Wont Get DHCP IP, IP Stuck at 0.0.0.0

Re: MR46 Wont Get DHCP IP, IP Stuck at 0.0.0.0