one Antenna for 5 ghz & other Antenna for 2.4 ghz coverage ... View more

Thank you very much ! If I understand correctly ,  below staggered approach I should try . Both the Antenna ( 2.4 & 5 ghz) directing/facing  should be  towards  2/3 area of approx. 46 mtr ( marked with Arrow). 1/3 area approx. 24 mtr would be automatically covered with both 2.4 & 5 ghz  even though  both the  radio band are not direced /faced/oriented towards 1/3 area. Of course , we need to try/test.       ... View more

Thanks for your explanation. We  should not cross connect  the radio to propagate both frequency signal (2.4 & 5 GHz)  in both the direction  from both Antenna for reason you have explained.  We  need to connect the Antenna as per recommendation ( one Antenna to 2.4 ghz  radio and other to 5 ghz)   We have the option of only MR 74 & MA-ANT-25 Antenna . There are multiple aisles . Aisle length is 70 mtr and  the rack height is 12  mtr. There are several aisles . We can mount AP in the celing above 12.5 mtr  as there is no wall to mount the in the wall side . Can we place the AP in the middle with both 2.4 & 5 ghz antenna direction in one side    as per below heat meat shown  (image 1)  or it would more prudent to place the beginning (north)   & end(south) of the in the alternate aisle .  Or we need put all MR-74-ANT-25 in one side (image 2).      ... View more

Thanks for your quick  response. Would appreciate if you can  explain a bit  more on what you have mentioned 'You have radio's that expect two spatially diverse antenna's to do 2x2.'  'By connecting the antennas that way you basically create two independent 1x1's and this will cause problems'. All together we have 2x2 radio.  2 * 2.4 +2* 5 ghz   Basically I am trying to cover some 70 mtr Aisle signal coverage by placing the Aisle  in the mddle (5 Mtr)  & want both 2.4 & 5ghz signal to propagate the  in both the direct tp cover all 70 mtr aisle   . APs will be mounted  in the ceiling. Other wise, I may have to  put twp APs in the Aisle to cover all 70 Mtr length, one at one end of the Aisle (north end ) & other end of the Aisle (south end). Do we have any other option ? May be this needs a deeper understanding.   ... View more

Hi All, I am still not clear about the connectivity. Requirement is both Antenna  support both 2.4 & 5 Ghz  band simultaneously . We are using MR-74 with MA-ANT-25 Antenna in a warehouse environment. Please help if below physical connectivity is ok. Both the antennas are connected to  both 2.4 & 5 ghz. I see some post saying one antenna to be connected to two 2.4 ghz  radio in the AP & other antenna to be connected to two  5 ghz radio port. Other post suggest  one antenna can be connected to both 2.4 & 5ghz radio at the same time.   -  will dual band with band steering work for RF clients when Antennas are connected as per  below diagram  ? - Will we have any coverage /signal propagation issue ? - What is the of  having two Antenna if they can not server both type of clients (2.4 & 5 ghz) simultaneously ) - I have a  location where I need to put  AP in the ceiling  & want two MA-ANT-25 antenna to propagate 2.4 & 5 ghz signal in both left & right direction. MA-ANT-25 Antenna Physical Connectivity ... View more