Meraki

ntru42 · ‎Apr 30 2020

Yes I did. For some reason when I set the configuration according to their guide I couldn't get it to work and it would fail phase 1. I tried my default configuration that was working before we enabled the higher encryption and it just worked. Thanks.

ntru42 · ‎Apr 30 2020

Hi, I'm curious what settings you have configured for this to work with 128AES/DH Group 14. I have this set for meraki and we aren't able to connect using windows 10 vpn but our mac users can connect with no issues.

ntru42 · ‎Apr 29 2020

thank you so much

ntru42 · ‎Apr 29 2020

Hi all, We are testing a higher encryption and our mac users can connect but our windows users error our getting the "L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations" notification. We are running windows 10 pro 64 bit. I have tried https://documentation.meraki.com/MX/Client_VPN/Troubleshooting_Client_VPN but no dice. IKEEXT service is running, the firewall can't be blocking it because mac users can connect, and I have tried a few times to re-enter the passphrase. I have also tried rasphone but this gets the same error. Any help would be appreciated.

Meraki

Community

About ntru42

ntru42

Community Record

Badges

Re: Meraki VPN Client with PCI Compliance.

Re: Meraki VPN Client with PCI Compliance.

Re: Windows 10 vpn client connecting to meraki with 128 encryption dh group...

Windows 10 vpn client connecting to meraki with 128 encryption dh group 5