Meraki

Shubham · ‎Jan 30 2018

Hi All I have MX-65 and I terminated MPLS link on LAN Port (My MPLS doesn't have internet), I configured the device via dashboard by connecting the device on Internet and tested my MPLS network and found perfect, after testing I removed Internet cable and only kept MX with MPLS link but after sometime My MPLS also stopped working. Please suggest

Shubham · ‎Jan 30 2018

Hi All! I connected MPLS link on LAN port (MPLS link doesn't have Internet breakout) and configured accordingly. I tested and i everything was working fine. After testing, i removed Internet connectivity and left the MPLS link and MX65 working, after some time my site went down. It would be great if someone can explain possible reasons.

Shubham · ‎Jan 5 2018

@PhilipDAth Thank you for such a prompt reply. I can use NAT mode for load balancing, VPN and DHCP but I won't be able to configure dynamic routing in that, right? If I use VPN concentrator mode, then I can only see 1 WAN port on the dashboard, then what is the use of BGP in that? Can you help us with your inputs in this scenario? Looking forward for a prompt reply.

Shubham · ‎Jan 5 2018

Hi! MX-65 can be used in VPN Concentrator mode or NAT mode. I have two links which will be terminated on MX65 and I need to do BGP configuration on same, along with Load balancing, VPN, DHCP. Please let me know if it is possible to achieve and how?

Meraki

Community

About Shubham

Shubham

Community Record

Badges

Can a MX-65 work without Internet?

Does MX-65 requires Internet connectivity all the time to work?

Re: MX-65

MX-65