Meraki

Yourguide32 · ‎Sep 22 2023

Yes sir, public IP is is directly connected and not behind anything else. Our first attempt was with a cellular provider using a Meraki cellular connection.. but that never worked so we have switched to a Starlink Internet connection (In bypass mode for those that know what that is) directly connected to the MX64.

Yourguide32 · ‎Sep 22 2023

Yes sir I am working a ticket with them and plan to update this post when a resolution is found. Currently they have just had me take the 2 rules I had, one for each WAN connection and combine them to a single that applies to "both". Which is actually the way I had it originally and doesn't work either. So waiting for next step now.

Yourguide32 · ‎Sep 21 2023

Howdy folks, Well our port forwarding setup works perfectly on our primary internet connection... but upon switching to the backup internet connection it does not work. I have tried using the dynamic hostname of the MX in my application which appears to switch to the correct IP just a few minutes after making the switch to backup internet.... yet traffic doesn't appear to be making it through via the port forward. Using the new external IP after switching also does not work. I have tried a rule that is set to "both" on the uplink, and also two rules using specific Uplinks of Internet 1 and Internet 2, but nothing is working.

Yourguide32 · ‎Jun 1 2022

I know this is a very old post, but I am experiencing the same or similar with an Ubuntu Server. The Meraki alert is attributing the MAC address from each of the two NICs to the same single IP address we have assigned in the DHCP server to just one of the NICs. I know this has something to do with "teaming" as we attempted to team the NICs on this system, but did not ever get it to complete fully. I suppose the alerts are evidence that some sort of teaming may be occurring since its detecting the MAC address change and alerting us. I don't really have a solution yet, but this post has pointed me in the right direction. Thanks.

Yourguide32 · ‎Mar 13 2020

'lo all.... Just received an MG21 and would like to set it up with an MX64 as a failover LTE connection. Any advice? Where do I start? Just plug it in to one of the MX64's ports and then somehow tell the MX that's a second WAN? Thanks for any pointers!

Meraki

Community

About Yourguide32

Yourguide32

Community Record

Badges

Re: Port forwarding on backup internet connection

Re: Port forwarding on backup internet connection

Port forwarding on backup internet connection

Re: Client IP Address conflicts

Re: Welcome to the new MG discussion forum!

Re: Welcome to the new MG discussion forum!