Meraki

Community
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 

About Fuji-Didi-74

Blocking laptops from SSID-Mobile

by in Wireless
‎Jun 15 2022 2:26 AM
‎Jun 15 2022 2:26 AM
Hi,   I did try to look for some answers but it seems my question is not answered 🙂   We have SSID-User and SSID-Mobile. The clients should connect to wired network or to SSID-user. Authentication is Radius based, using a security EAP method configured on the RADIUS server. network access control via EAP-TLS as authentication protocol for devices supporting 802.1x and MAC Authentication Bypass for the rest of devices such as printers,controllers, cameras.   Now, the users sometimes manually connect to the SSID-mobile. We would like to disallow that.   Is there a way to block laptops/PC's to a specific SSID on the Meraki ? Thanks.   ... View more
Labels:

Re: Meraki MX84 warmspare WAN IP Issuses

by in Security & SD-WAN
‎Feb 11 2020 6:38 AM
‎Feb 11 2020 6:38 AM
We've setup the active/passive MX84 with 3 public IP addresses on WAN1 (public VIP + each MX 1 public IP). Now we would like to add another ISP and configure WAN2 in the same way. So 3 public IP addresses on WAN2.   Would that do the trick as a redundancy for the ISPs ?   PS: the appliances are connected with ISP via a L2 switch, so we actually only have one uplink to the ISP.   As we also have client VPN setup, we would like to use the Dynamic DNS so it would move automatic to other public IP in case of issues. For the site-to-site non-meraki VPN's, we would setup a second VPN to Azure (for example).   Anyone any doubts ? Setup supposed to be just add the Public IP addresses on WAN2 and connect it ? WAN2 Static IP add DNS I don't see where to say WAN1 is the preferred interface, but I didn't actaully configure the interface yet as I don't have the IP range from second ISP yet.   ... View more
© 2024 Cisco Systems, Inc.