Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About jwinters99
jwinters99
Comes here often
Member since Jan 16, 2020
Mar 9 2020
Community Record
14
Posts
0
Kudos
0
Solutions
Badges
Mar 6 2020
5:28 AM
Ive now tried this on 9 different sites and i get the same result on all 9. Pick a pornography site, any one and it doesnt stop/block it. Pornhub.com or Youporn.com. I even tried Ebay.com as an auction site and meraki doesnt stop any of it. "It should work" doesnt work...... Every site i have tried to block shows up in the tool under the category that i have blocked but it doesnt seem to care. Meraki just lets if right on past. what is missing?
... View more
Mar 4 2020
10:27 AM
This is has been setup for weeks and it still doesn't work. And it appears that no one is reading the original post. If its not in that picture provided it hasn't been setup. There are no policies setup. There is no AD setup. There are no URLs added to the whitelist. Using the Tool the website shows up in the correct category and it should be blocked. Firmware is 14.4 Again. Beyond what is in the pic provided, what if anything needs to be configured? Do group policies have to be used? Does AD have to be used?
... View more
Mar 4 2020
9:46 AM
Sorry, i thought the picture was self explanatory. I added the categories that i want to block to the blocked website list, and then looked up a site using the category lookup tool and it fell into the category that is supposed to be blocked. When im connected to the network and go to the same website it is allowed instead of being blocked. what is missing? what other config is needed to properly enable?
... View more
Mar 4 2020
8:16 AM
That really didnt answer my question. Beyond what is in the picture provided, is there anything else that has to be setup? Do I need some sort of AD or Group polices set in order for Content Filtering to work?
... View more
Mar 4 2020
7:52 AM
I am a bit confused about how to setup content filtering correctly. If I set up a blocked website list it doesnt work. I do not have AD integration or group policies set. Do these need to be used and setup for content filtering to work or can it work without them? Below is how its setup and nothing beyond this has been done. What am I missing?
... View more
Jan 24 2020
3:22 PM
It’s not a PSK issue. I already tested this by just making it Cisco and it still fail. I’ve disabled all firewall rules and Intrusion Prevention and detection. It’s a straight shot into the site and nothing works. I’ve tried the script to build the vpn and it fails. Nothing works. This is extremely frustrating.
... View more
Jan 24 2020
3:20 PM
Not a dell machine. Doesn’t work from IPhone either. Nothing works.
... View more
Jan 24 2020
1:56 PM
I figured out your script. Ran it, still doesnt work. Same result.
... View more
Jan 24 2020
1:25 PM
Public IP on the MX Wan 1 port. PSK is correct. For testing Ive simplified it. I dont know how to download, modify or run your script. Can you give me guidance on that as well?
... View more
Jan 24 2020
1:14 PM
Tried this. Still fails. How is this supposed to work if the client is in a hotel or other public wifi? They arent going to have the port forwarding available to them. Here i have access to the router and its admin, out in the world i dont.
... View more
Jan 24 2020
12:18 PM
I have an MX67 that i have followed the setup guides for allowing VPN. I am running into the error code 789 on a Win 10 PC. I have followed the trouble shooting guides but it still cant get it to work. Can someone please provide a better explanation of what the port forwarding should look like? Where does that need to be configured? On the MX or at the local end users internet router? I am unable to connect from an Iphone as well over LTE. What am I missing in this setup?
... View more
Jan 16 2020
11:00 AM
Again, where do I go to set the speed and duplex? I see no options for this.
... View more
Jan 16 2020
10:59 AM
I see no "ethernet" option on the Appliance status page of the MX84. Where is this located? Under the Uplink tab there is no where I find to set the speed or duplex of the port. Only to set the IP info.
... View more
Jan 16 2020
10:28 AM
I have a MX84 that the WAN port is coming up as 100/half. I dont have access to the WAN config from the providers equipment. I'm looking for somewhere to change or modify the port settings for the WAN ports but cant find anything. Can someone share some light on where to fix this? Is this possible?
... View more
© 2025 Cisco Systems, Inc.
