Community Record
12
Posts
1
Kudos
0
Solutions
Badges
Mar 29 2024
7:22 AM
Did you have to reach out to your Cisco Meraki rep to unlock this? We are in the same position with multiple locations that have fridge monitoring. We would like to be able to assign access to individual networks.
... View more
Apr 29 2022
8:53 AM
1 Kudo
Maybe reach out to your Sales Rep and get a Eval license that will at least remove that variable.
... View more
Apr 29 2022
8:48 AM
Maybe try disabling the VPN on the site with issues and re enabling, or even reboot the MX. That is odd it shows not connected to the cloud. Might have to put in a support ticket.
... View more
Apr 29 2022
8:32 AM
We did not add any rules to the remote site MXs to get it to work. Maybe check in the VPN Status page see if you have an alert there telling you what might be the problem.
... View more
Apr 29 2022
8:18 AM
I removed the Starlink Router so Dish strait to MX. We are in Routed Mode on the Starlink sites.
... View more
Apr 29 2022
7:42 AM
There is Starlink for Business.
... View more
Apr 29 2022
7:40 AM
We use the Meraki MX with Starlink as the Internet connection. To not double NAT we removed the Starlink Router. So we have the Starlink Dish connected to the power injector and the internet port on the power injector connected strait to the WAN on the MX. Then use the MX as the router.
... View more
Apr 29 2022
7:36 AM
We have 2 remote sites using Meraki SD-WAN with Starlink as the internet. These two sites connect back to a Main site that has an edge firewall and the MX Concentrator behind that firewall. The trouble was with the remote site was not able to build the VPN tunnel from the remote site with Starlink back to the Concentrator.
... View more
Apr 28 2022
1:46 PM
I was able to figure out our issues at the site that had problems. Our Firewall in front of the concentrator was blocking the external IP from getting to the concentrator. Created a firewall rule and it is working now but the IP not being static we have had to adjust the rule a couple times because of changing IPs.
... View more
Mar 1 2022
8:48 AM
We setup Starlink in 2 different locations as a secondary on our MX67s, 1 site has been working fine for VPN but the other is getting CGNAT so its external IP is different than the ones assigned dynamic to my Meraki WAN2 port, on this location it will not establish a VPN.
... View more
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 1 | 33852 |
