Hello,   As we have standard Cisco design guides for Cisco catalyst and Nexus switches for their enterprise and Data Center customers along with the standard set of configurations like STP, Etherchannel, VSS etc...Can any one help me in sharing standard design documents for Cisco Meraki MS switches (which includes Layer 2 access switch - MS120-8, MS120, MS210, MS225) & Layer 3 access switch and aggregration switch - MS250, MS350, MS410 and MS425) with the standard configs and best practices recommendations for Branch site, Enterprise HQ and Datacenter.   Please respond its urgent...   Thanks ... View more

Hello Team,   Need your support in getting the answer for the below mentioned queries. We need the answer basis on Meraki Technology as a recommendation to end customer apart from what standard rules Meraki has mentioned in its document.   Any Pre-requisite ask (questions per configuration parameters respectively) from the customer when customer places the order for MX devices...do someone have this Its regarding SDWAN ( Dual uplinks on single MX) When should we recommend PBR or Performance based routing to customer What should be the recommendation for traffic type ( like Voice, Video and Data) in case we have one MPLS link and one internet as part of dual link Same what should we recommend to customer for traffic types ( Voice, Video or data) in case one of the link is 100 Mb and other is around 50 Mb for example. What should be the traffic shaping policies we should recommend for below cases :- If both the uplinks are internet If one uplink is internet and other is MPLS. Thanks ... View more

Hello Guys, Need your support, is there any document which states that If customer having 2 links (Internet + MPLS) at spoke site and if Internet link goes down then also the VPN traffic will flow where the new provisioning and adding new device will not happen....Need some document around this.   Thanks Amy ... View more