I'm also interested in a real response as to why this would be difficult to implement or why the mdns client name is some kind of benefit to me.   This design limitation really wrecks the "at-a-glance" nature of the interface. ... View more

Furthering MerakiGeoff,  you may need to add static routes to L3 switches on both sides of the wireless hop pointing to the opposite side   ... View more

I agree - we put the MR55 in our new building and have had nothing but issues but the AC gear in our other buildings have no issues ... View more

I have got one MR45 to test in a meeting-room connected with one gigabit to an MS225-48 switch. It‘s running well. The new apple iPhone 11 is running with wifi 6. ... View more

Hi there,   The Z3 is really meant to be used as a teleworker gateway device at home or when traveling so you can connect to it and have a VPN tunnel back to a VPN head-end at a datacenter and access company resources. It is meant for up to 5 clients - your phone, laptop, maybe a tablet. It's not meant to be an edge device or firewall for a substantial network. Depending on how many client devices you're needing to support on the network, you'd be better off with an MX64/65/67/68 (up to 50 clients) or MX84 (up to 200 clients) if you're planning for growth. The MXs are more expensive than the Z3, but are 100% better suited to be an edge firewall. It sounds like you have over 100 devices so an MX84 should be the ticket. ... View more

Hi there,   It may not be enough to just have LLDP enabled. See this KB and make sure the port is configured as is recommended as well: https://documentation.meraki.com/MR/Other_Topics/Low_Power_Mode_on_Cisco_Switches.   Also, it is not recommended to use an AC power adapter while PoE is enabled on the switch port. It should be either PoE or AC adapter. ... View more