So the network looks like this Internet ---- ISP Hub--- MX64 --- Switch --- AP Is that correct? It may be worth having a quick look at the uplink connectivity of the MX into the hub. Security & SD-WAN > Appliance Status > Tools = Run a Throughput test (disregard the results) Navigate to the Appliance Status > Uplink tab and watch for the packet flood on the uplink that should give a good degree of visibility of what the bearer cct can manage when flooded. Also check to see if you have lots of packet loss when you do this as well (duplex issues). Is the ISP's hub just a modem or is it a router? May be worth checking to see if it's also running NAT or NO-NAT. ... View more