Hi Nolan,   The AP's are all running 27.4 FW.  ... View more

@PhilipDAth yes drivers have been updated on all devices, one of my first steps. 🙂 ... View more

@Tadpole86  So support asked for a pcap from the Meraki dashboard however that is one of the most frustrating tools ever built. I've missed the event a few times because the tool just stopped capturing. So I will be going onsite tomorrow to perform a wireshark packet capture. This is for all clients that are on the system not just one individual person. I will focus on individual problems and not try to loop these into one cluster of an issue thanks for that tip! ... View more

@NolanHerring User can be standing still, AP kicks the user off and will not allow them to reconnect for up to 5 minutes. User has line of site with the AP they are connected too ... View more

Also getting the same errors.   In conjunction with these errors happening. I've been working with Meraki support and they are telling me they can't figure out what is causing these error below.   Wed Aug 19, 2020, 10:23:18 USER1 AP1 Studio Authentication Client entered wrong password.type='WPA-PSK auth fail' associated='false' radio='0' vap='1' Wed Aug 19, 2020, 10:20:57 USER2 AP2 Studio Authentication Client entered wrong password.type='WPA-PSK auth fail' associated='false' radio='0' vap='1' Wed Aug 19, 2020, 10:08:06 USER3 AP3 Studio Authentication Client entered wrong password.type='WPA-PSK auth fail' associated='false' radio='0' vap='1'   Can't pinpoint what is causing them, Meraki support has asked me to provide pcap but I can't run the pcap and catch them happening at the same time. ... View more