Hi all,    Hopefully I can find a solution or confirmation on here 🙂   I have recently installed X2 Stacked Cisco Meraki MS-425-16 Core Switches with 30 Edge Switches. The switches are on a 'management' VLAN range and I have a 3rd party ASA router that needs to be on a /30 'internet breakout' range.    What should the cores gateway be? I am unable to set the ASA as the default gateway on the core switches as they are on a different range. I normally point my edge switches to the core stack as the gateway and use the router as the gateway on the core's as they're normally on the same range.    I tried to add my core switches to another range where I have a smoothwall webfilter, added the smoothwall as the gateway which then points back to the core stack as its gateway but this also did not work.    Connecting a 4g router on the same management range and setting this as the default gateway for the cores works but this is not ideal.   Any help or advise would be much appreciated. Josh ... View more