About xeg12

xeg12 · ‎11-24-2020

Thanks all, I am most interested in the 5G range, and the charts have helped me to decide how to place it. NOT in the location I first thought!

xeg12 · ‎11-23-2020

I have just obtained a Meraki MR36 and would like to know the broadcast field pattern so I can place it in the best orientation for maximum efficiency

xeg12 · ‎10-16-2019

I assumed that - and it used to be the case, but not now. I have tried ping and it cannot ping the PlusNet router. The PlusNet router has a 4 port switch on the back - the MX64 is plugged into one of those ports and if I plug my laptop directly to another of the ports I get access. This suggests that there is not a firewall issue in the PlusNet router as it would block access via all ports. I have ensured there is minimal firewall blocking on the PlusNet router on the basis firewall activities are done by the MX64 and having the PlusNet router interfere could cause hard-to-trace issues.

xeg12 · ‎10-16-2019

I have an MX64 which connects to the internet via a PlusNet fibre VDSL router on the WAN port. I used to be able to access the web management foe the PlusNet router from my internal network (its address is on a separate private subnet). I can no longer access the router but cannot see how to setup a route to do so - I do not want to keep having to plug in directly just to check the PlusNet router. I tried static routes and VLAN subnets but of course they do not know about the WAN port. What do I need to do? Preferably I would like to provide access just to the specific IP address of the router.

xeg12

Community Record

Re: MR36 broadcast field

MR36 broadcast field

Re: MX64 access to router

MX64 access to router