Hi Eric.   You need to go into the VPN adapter settings on the machine connecting to the VPN. Pull up the Advanced TCP/IP Settings -> DNS Tab and select "Register this connections addresses in DNS"   -mer_tech01 ... View more

Hi  avraham_g,   Depending on the feature that you using on the oscillator. You can use the traditional feature like NTP which will work normally or you PTP which uses multicast by default. You might want to take the packet capture just to see first if the device is able to receive any traffic from the server.    --mer_tech01 ... View more

Hi wperry1,   As per the documentation Wi-Fi configuration can only be configured in Device Owner mode. This will not work or BYOD devices. Try enrolling a test device in Device Owner mode and see if it helps.   https://documentation.meraki.com/SM/Device_Enrollment/Android_Enrollment#Feature_Comparison   -- mer_tech01 ... View more

Hi avraham_g,   There is a Wi-Fi feature called TimeSync. It can be used for peer-to-peer time sync as well. It seems like a new standard is not readily available at the moment.   -mer_tech01 ... View more

Hi sg, Meraki support did provide the public-facing RCA for the push notification issue. You want to call support if it is an outage or backend issue. They are helpful enough to provide the root cause of the issue. --mer_tech01 ... View more

Hi Kamome,   Are you using Chrome to access the Dashboard? I am seeing a little bit slowness with IE but not with Chrome.  If you are using Chrome maybe try clearing the cache and see if it helps.    --mer_tech01 ... View more

Hi SEFE,   I think this was a backend issue. The issue is resolved now as I am able to see my Windows device online again.   --mer_tech01 ... View more