Meraki

LeopoldN · ‎May 20 2025

Thank you for the suggestion but I am not trying to isolate the guests from the rest of the network but from each other. I already use a VLAN for the SSID and was just dissapointed to find Meraki NAT (with an isolated 10.0.0.0/8 network for each client), that you can use on APs, is not available for MX.

LeopoldN · ‎May 15 2025

I had hoped group policy was an option but I didn't try using it since the only option is to overrides the existing L3 firewall rules and I had already tried using a deny rule for the guest network on the firewall tab. It would surprise me if a group policy firewall rule has a different functionality than configuring firewall rules on the firewall tab. But thank you for the suggestion.

LeopoldN · ‎May 15 2025

Hi everyone, I was checking out the internal wireless settings on a MX67W and found that the option to use Meraki NAT with isolated 10.0.0.0/8 networks is not available. And since the firewall rules only apply up from layer 3 and not in the layer 2 VLAN I currently have no idea how to isolate clients from each other on a guest SSID. Is there some way to still achieve that requirement or do I actually need standalone APs for that? Best Regards Leopold

Meraki

Community

About LeopoldN

LeopoldN

Community Record

Badges

Re: Client Isolation on MX67W Guest SSID

Re: Client Isolation on MX67W Guest SSID

Client Isolation on MX67W Guest SSID