Thanks for the suggestion but it wasn't NAT or ACL. In my current Cisco networks I've avoided using vlan 1 for anything and I was trying to attempting to do the same on this network but Meraki makes that pretty difficult to do.  I had vlan 10 set as the native vlan which apparently was causing the issues.  Once I added vlan 1 as a transit vlan to the 350 and pointed the ASA static route at that and set it as the native vlan on the Meraki switches it worked.  If anyone has any ideas on how to eliminate vlan 1 from the environment i'm all ears.   Thanks again for the suggestions. ... View more