The Meraki Community
Register or Sign in
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
  • About KSVSachsen
KSVSachsen

KSVSachsen

Comes here often

Member since Sep 12, 2019

‎06-19-2023

Community Record

5
Posts
0
Kudos
0
Solutions

Badges

First 5 Posts View All
Latest Contributions by KSVSachsen
  • Topics KSVSachsen has Participated In
  • Latest Contributions by KSVSachsen

Set Up Google TV on a Meraki WLAN

by KSVSachsen in Wireless LAN
‎06-14-2023 11:20 PM
‎06-14-2023 11:20 PM
Hi,   we are using Meraki MR-32 and 33 behidn MX-84 to provide some WLANs with. I'm not possible to get a Google TV 4K Working. When it joins the WLAN it says that  it has no connection to the internet.    Can someone, who has a working google tv, proivde me the correct settings/rules.    best regards    Robert ... View more

Re: SIP Only one-Way in z3 Site2Site VPN after MX Upgrade from 84 to 95

by KSVSachsen in Security / SD-WAN
‎11-06-2022 01:14 AM
‎11-06-2022 01:14 AM
All on 17.10 (MX84's and MX95's)   We switched back to the MX-84 Pair.  Z3 VPN Auto-Nat seems to work  fine as Before. SIP Audio now two way. Again ... View more

SIP Only one-Way in z3 Site2Site VPN after MX Upgrade from 84 to 95

by KSVSachsen in Security / SD-WAN
‎11-04-2022 12:32 AM
‎11-04-2022 12:32 AM
Hi,   we have replaced our MX-84 HA Pair with two MX-95. everything works fine except the SIP Communictaion from the Cisco phones behind the Z3 Teleworker Site2Site VPNs that worked before.  The SIP Audio  is only One-Way (outgoging from Z3 Phone to Internal).  We havent done any other changes.    It is an IPv4 enviroment  The NAT Setting for Site-2-Site VPN was Always Set to automatic  via Meraki Cloud. Does someone have expirienced this or a similar Problem ?   with regards Robert ... View more

MX85 VLAN with IPv6 only not Routing (to the WAN/Internet)

by KSVSachsen in Security / SD-WAN
‎07-25-2022 02:43 AM
‎07-25-2022 02:43 AM
Hi,   i have an MX85 with IPv4/IPv6 at Configured at WAN1 (IPv4 is Static / IPv6 is auto).   I want to  make a VM available through an Public IPv6 Adress wich i get from my Provider. I 've tried the following steps without succcess.   I configured a VLAN with IPV6 (auto) only. When I attach a VM to this VLAN we get an IPv6 LinkLocal-IP  (fe80) and an fe80 Gateway Addres via IPv6 DHCP from the MX. With this configuration nothing works. No Ping no DNS resolution. It only works if I enable IPv4 at the MX and the VM. I have also tried to set manual IPv6 Adresses to the VLAN and the VM. This also doesnt work. I 've noticed that there are no IPv6 default routes in the Routingtable of the MX. Do I have to set the up manually? Could it be that IPv6 Only is impossible with the MX85?   I would be glad to hear some advice on this. Maybe someone has expierence with Meraki and IPv6.   regards    Robert   ... View more

MS 355 QSFP Cable Speed Info only Raw Signaling rate

by KSVSachsen in Switching
‎09-12-2019 07:31 AM
‎09-12-2019 07:31 AM
Hi,   is it normal that on QSFP Ports with 40GB Cable Only 14.1 GB/s are  shown as Speed Info ?     best regards   Robert ... View more
Powered by Khoros
custom.footer.
  • Community Guidelines
  • Cisco Privacy
  • Khoros Privacy
  • Cookies
  • Terms of Use
© 2023 Meraki