This isn't a production device making it not worth raising a ticket over this with meraki support. I have a sheevaplug with a wifi USB dongle running archlinux & wpa_supplicant, mostly for testing reasons. It is configured to connect to a WPA-PSK protected SSID being transmitted from a MR42 running firmware 27.6. The error messages I get are different at each end wpa_supplicant reports "reason 2=prev_auth_not_valid" whereas the meraki dashboard reports "eapol_timeout" For reference, the signal rating is -55dbm or thereabouts when I perform this testing. Connecting to an open network from the exact same MR42 works without issue. 802.11r is turned off, as is band steering & 802.11w Has anyone else encountered this? ... View more

My employer has been rolling out more Meraki kit (Z3Cs & MG21Es) as they provide a cheap way of connecting staff. One downside of using 4G is that the links often fail (Hello from Australia!) and it would be nice to monitor these sites via the existing NMS platforms currently used - Cisco Prime Infrastructure. One thing that I have known for a while now is that Meraki kit does not respond properly to SNMP requests for the sysUpTime variable. I cannot understand why that was omitted as it seems to be such an easy thing to provide - just pass what ever uptime the kernel has or failing that, what ever uptime tick counter the SNMP agent uses. It doesn't need to be super reliable, just there. For the record, the lack of this variable breaks the operation of the otherwise very handy 'Real-Time Bandwidth Monitor' by Solarwinds, which I tend to use as an adhoc troubleshooting tool quite often.   Can someone from Meraki comment on whether Meraki will consider implementing that variable in the Meraki SNMP agent's MIB? The lack of support for this makes meraki kit seem less-than-enterprise grade. ... View more

Is there a way to Purge/Clear client entry from the Network-Wide Client list? What is the length of time that needs to pass before the Meraki dashboard considers them expired and removes them? Can that process be preempted? ... View more