About Farrukh

Farrukh · ‎08-02-2020

for ( organizations/<org-id>/deviceStatuses ) API The devices that are online there time zone is set to UTC. The devices that are offline there time zone is set to configured time zone like EST Key lastReportedAt have some inconsistency: If the time duration is short the output do not follow the configured time zone. If the time duration is longer then few hours the output follow the configured time zone.

Farrukh · ‎08-02-2020

Is it possible to check the time zone of all the devices in the network?

Farrukh · ‎08-02-2020

What we can consider alerting as online or offline ?

Farrukh · ‎08-02-2020

In this API what does it meant if the status is Alerting. /organizations/{organizationId}/deviceStatuses [ { "name" : "My AP" , "serial" : "Q234-ABCD-5678" , "mac" : "00:11:22:33:44:55" , "status" : "online" , "lanIp" : "1.2.3.4" , "publicIp" : "123.123.123.1" , "networkId" : "N_24329156" }

Farrukh · ‎07-22-2020

need to access multiple pages on the /networks/{networkId}/clients API . Looking for a script that can pull all the clients in the network. and some networks have multiple pages.

Farrukh · ‎07-13-2020

https://api.meraki.com/api/v0/networks/ { networkId } /traffic

Farrukh · ‎07-13-2020

Which API can be used to calculate the total bandwidth usage on a site to get the output like this in the summery report

Farrukh · ‎07-10-2020

which API is available for usage per site

Farrukh · ‎07-08-2020

Is it possible to generate the usage report using API as it is available in the dashboard summary report

Farrukh · ‎06-04-2020

Actually i am looking for over all bandwith limit or uplink bandwidth limit

Farrukh · ‎06-04-2020

Can we control uplink Band width Usage on APs using API.

Farrukh · ‎06-03-2020

Total bandwidth usage per network or per device and uplink Usage

Farrukh · ‎06-03-2020

Is their is an API that can be use for the up link Usage Monitoring of an AP?

Farrukh · ‎05-28-2020

Is this action batch support list is for API v0 or v1.

Farrukh · ‎05-28-2020

Where we can get the list of supported action batches for V1 API HTTP REQUEST GET /networks/{networkId}/wireless/meshStatuses

Farrukh · ‎03-09-2020

Can we ping Meraki APs via an API?

Farrukh · ‎03-06-2020

yes but their is lot of data that is not exposed through API like https://community.meraki.com/t5/Developers-APIs/Is-their-is-an-API-for-Link-Quality/ https://community.meraki.com/t5/Developers-APIs/Is-it-possible-to-extract-this-Current-mesh-routes-data-through/

Farrukh · ‎03-06-2020

Meraki deshboard

Farrukh · ‎03-05-2020

Farrukh · ‎03-03-2020

Farrukh · ‎02-06-2020

their is some issue with python library. It is working with REST Call

Farrukh · ‎02-06-2020

yes it is working now but not with the Python liberary

Farrukh · ‎02-05-2020

from meraki_sdk.meraki_sdk_client import MerakiSdkClient from meraki_sdk.models.update_network_device_model import UpdateNetworkDeviceModel from meraki_sdk.exceptions.api_exception import APIException x_cisco_meraki_api_key = 'X-Cisco-Meraki-API-Key' client = MerakiSdkClient(x_cisco_meraki_api_key) devices_controller = client.devices collect = {} network_id = 'networkId4' collect[ 'network_id' ] = network_id serial = 'serial0' collect[ 'serial' ] = serial update_network_device = UpdateNetworkDeviceModel() update_network_device.name = 'My AP' update_network_device.tags = ' recently-added ' update_network_device.lat = 37.4180951010362 update_network_device.lng = -122.098531723022 collect[ 'update_network_device' ] = update_network_device try : result = devices_controller.update_network_device(collect) except APIException as e: print(e)

Farrukh · ‎02-03-2020

i have another question. is it allowed to do web scraping over meraki dashboard?

Farrukh · ‎02-03-2020

We have around thousand sites where we have a gateway and multiple repeaters. in many cases repeater have had bad connectivity with the gateway. There fore we are interested in identifying the performance and connectivity from repeater to gateway.

Farrukh

API Early Access Group

Community Record

Badges

Issue with the time zone of lastReportedAt in the deviceStatuses API

Is it possible to check the time zone of all the devices in the network ?

Re: In the deviceStatuses API what does it meant if the "status":"alerting"...

In the deviceStatuses API what does it meant if the "status":"alerting".

need to access multiple pages on the /networks/{networkId}/clients API dyna...

what are the unites of the sent and receive data in the following API

Which API can be used to calculate the total bandwidth usage on a site

Re: Usage per site using API

Usage per site using API

Re: Can we control Band width Usage on APs using API

Can we control Uplink Band width Usage on APs using API

Re: What API can be use for Usage Monitoring

What API can be use for Usage Monitoring

Re: Is is possible to use Action Batch for /wireless/meshStatuses on V1 be...

Is is possible to use Action Batch for /wireless/meshStatuses on V1 beta A...

Can we ping Meraki APs via an API?

Re: Is it legal to do web scraping on Meraki deshboard

Meraki deshboard

Is their is an API for Link Quality

Is it possible to extract this Current mesh routes data through API

Re: I have issues with renaming the AP ( update Network Device) is not work...

Re: I have issues with renaming the AP ( update Network Device) is not work...

I have issues with renaming the AP ( update Network Device) is not working ...

Re: API for Mesh latency

Re: API for Mesh latency

Re: get_network_devices(network_id) JSON transformation

How to access Retry-After header in API response