Dear All,   I have an MX84 configured with a static IP as provided by an ISP whom has a fibre setup in my clients building. The issue I have is the Meraki will not connect on the WAN. Configuration as follows:   MX84 WAN1 --> CISCO CATALYST PORT1 (ACCESS PORT) in VLAN 2 --> ROUTER --> INTERNET   I've not had to use this type of setup before on the WAN ports and I'm wondering why the Meraki won't come on line. Do I need to enable VLAN tagging and assign it VLAN2 or should it just work given that its connecting to an Access Port?   Sorry if this is vague but I'm unable to get to site at present to check. The output from the catalyst switch connected directly to the meraki WAN port displays STATUS - Not Connected.   Any input much appreciated   Regards ... View more