Help with the setup: We have a Meraki available to use/available. We need a "dumb" switch to use between our Velcocloud (for voice and data) and our firewall and voice Adtran to passn traffic Currently, we are using a ubiquiti and everything works fine. We want to use the Meraki 120 but are not sure how to configure it since it needs an IP and access to the internet. HARDWARE and CONNECTIONS: We have 2 veloclouds with 2 ISP connected. we need Both of the data ports of Velo's go into a Meraki ms120. (untagged -just acting as a dumb pass-through switch) The OUT of the Meraki is 1 connection goes to LAN(firewall), 2 connections go out to a voice Adtran Question: How do we program the Meraki's to just pass traffic through when it does not need to be managed or on the network. No DHCP needs, no routing needs - just needs to pass the traffic through ie: it needs 2 ISP(white) out from velcocloud_> Meraki -> 1 ORGange goes firewall(LAN) 2 outgoing drops goes to the Adtran for voice(white) Does this make sense? trying to see what I'm missing because without giving it an ip or connected to the LAN, it does not make it out to the internet and falls offline. Thank You. Garett
... View more
