Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About Pedro
Pedro
Getting noticed
Member since Oct 23, 2017
May 8 2019
Brazil
Network Administrator
Community Record
30
Posts
12
Kudos
1
Solution
Badges
Apr 17 2019
4:41 AM
@pgrovesnz How are you In fact what is recommended are RF Profiles. There you create a new profile and you can leave channel 5 or 2.4ghz enabled or disabled, for example. After creating this profile you inform which access point you will place. For now it's this solution I found. Good luck Peter.
... View more
Feb 27 2019
11:02 AM
@jdiggins Today I only have 2 SSIDs. 1 Network Visitors using DHCP from the Meraki network. 2 Corporate NetworkThe police group is always based on SSID number 2, because it is where the Vlans exist, for example: Vlan1 = Default -> A non-administrative network. Just released navigations at meal times within the corporation; Vlan2 = Local Lan. Here is where my servers and administrative network are; Vlan3 = Smartphones and VOIP; And go to Vlan6.That is, all are in a single SSID, but in group polices pertaining to different Vlans. Strengths:- Environment totally safe and controlled;You do not have to worry about Wifi passwords; Negative points:- For a trusted device to enter the network, the T.I team needs to manually play the same on some police group.In my daily life here within the corporation, I improved my administration a lot and reduced my problems of interference and loss of connections 100%. Is it a little clearer? Sorry, my english, I'm using google translator.
... View more
Feb 26 2019
8:46 AM
In fact what was able to solve my problem was working only with 2 SSID. And with this solution group creations polices and vlans. I've been for months without this problem. But I had to think too hard to come to that conclusion.
... View more
Oct 3 2018
12:03 PM
So okay, I should not worry. It is that looking at the time gives fear of connection / disconnections. Thank you @PhilipDAth
... View more
Oct 3 2018
11:48 AM
Hello everyone, On the access points status page what does Contacted at really mean? Because all times are reset, never exceed 2 hours, for example. Can this be some instability of meraki cloud connection? Local network ? Or should I disregard? Follow print below: Thank you Pedro
... View more
Oct 2 2018
10:11 AM
3 Kudos
I activated a new RF profile only for 5ghz in 1 AP only. Looks like it worked. I just wanted to know even if this was the right concept. Thank you.
... View more
Oct 2 2018
9:47 AM
Hello everyone, I have 11 MR33 with 2 SSID's. I would like to disable the 2.4ghz radio from only 1 of these 11 AP's. What is the most correct way to do this? Create an RF profile for it? Is it really possible to unhit the 2.4ghz radio? Thank you, Pedro.
... View more
Aug 22 2018
4:20 AM
2 Kudos
Congratulations Meraki community !!! We here in Brazil are very happy with the solution. And we will continue forever! Congratulations CarolineS !
... View more
Apr 26 2018
3:51 AM
Hello everyone, Is anyone currently implementing or using the new wireless RF Profiles and RX-SOP options? Any recommendations we should take into account? Precautions? Pedro.
... View more
Apr 24 2018
4:09 PM
7 Kudos
Hahahaha very well remembered I will tell a very good one ... At one time I came to one of my clients who complained too much about the wifi network and would like a solution for now. Until then ok let's analyze the place. Personally going to 2 huge sheds plus administrative area. From what I remember I was found every 40 meters tplink routers every 1 transmitting a type of SSID and all on the same fixed channel frequency. The network simply crashed ... And the funniest old network administrator lied to everyone saying that every ssid network served something, that is, there were about 7 ssids spread for the purposes of visitors, clerks and board and obviously with all this zone all in the same vlan default switch and same range of dhcp. haha ha. It is comic and traumatic just to remember this time. I remember very well that for me to locate the tplink routers around the place I had to use the wifi analyzer software on my device and the noise of it would give me north if I was getting close to them or away ... hahahaha how funny I am giving many laughter now ... And most were all above the lining where only really the person who installed knew ... Summary of this story: 11 meraki MR 33 simply fantastic! And very well located, distributed and managed ... I love Meraki from the heart!
... View more
Feb 15 2018
8:12 AM
@MRCUR Great ! Just like the AP Meraki. I am completely happy with performance x management.
... View more
Feb 14 2018
12:37 PM
Hello everyone ! Here I use the MR33 and had no problems after upgrading to 25.9. What I still could not find was the datasheet of that firmare. Someone owns and could supply me? Thank you Pedro Constantino
... View more
Dec 15 2017
5:01 AM
@LeoG @PhilipDAth After doing the reimplatação of the network using group polices instead of Vlan and other SSIDs I can affirm that the wireless network has changed totally. In 48 hours I did not have a fall, I did not have any type of interference and all my VOIP connections normalized, without ropes, without robotic voice and loss of connection. Roaming is also a service that has stabilized, I do not have drops from one AP to another. Actually what works in Meraki is the polices group rules and honestly it gets easier to manage, more secure and controlled. I can say that I am happy at the moment and I will have a satisfied new year! lol Many thanks to all for your patience and understanding. Thank you very much
... View more
Dec 13 2017
2:46 AM
@LeoG I'd like to know if I should worry about these types of events below desassociation. As I'm reading a lot of logs this is making me confused. Should I consider them as problem? I do not need to worry because it can be something normal? Because they are users who walk all over the company, see that they travel in several APs during the day. That's why sometimes I get confused by these desassociation events. As of today 12/13/2017 I have only 3 SSIDs in each Vlan and I have created group rules polices allow / deny. Is that the right concept? I'll monitor and cheer here. Pedro.
... View more
Dec 12 2017
11:47 AM
@PhilipDAth Sorry, I mispronounced. I'm using the steering band.
... View more
Dec 12 2017
11:32 AM
@PhilipDAth It is enabled because I own some Iphones, Samsung A2017 and S8. But the biggest focus would be the Samsung A2015 in which the native 802.r feature does not seem to me to be a pity. Another point I'm not so fond of using group polices is that I'm forced to use the dual band because as I will have several types of devices, some will not have the 5ghz available. And the devices that are already 5ghz run the risk of staying in the 2.4ghz channel. Would you have any other solution also for this model?
... View more
Dec 12 2017
11:07 AM
@LeoG I would like your technical opinion and experience that you already have with Meraki. I own 5 SSIDs: Vlan default = SSID 1 Vlan 2 = SSID 2 Vlan 3 = SSID 3 Vlan 4 = SSID 4 Vlan 5 = SSID 5 (hidden) Only one of these Vlans I use the DHCP Meraki, in which I use for visitors with registration in the meraki portal and authentication by splash page. And this SSID I do not have to worry about roaming. In Vlan 4 it's where roaming would have to work and it's causing me the biggest problem. This network is separate and specific for smartphones because we are users of VOIP (SIP). And users move quite a bit here being a very large company in terms of m / 2. The image below will be in Portuguese because I am from Brazil the error is this: When he accuses this error are those logs that I have sent there are some previous answers about disassociation errors. My swtichs are branded Dell all with Vlan tags between Vlan default and Vlan 4. Communication works perfectly, IP addressing, etc... The same problem is the scrolling and the reason for this authentication error. When that happens we are at least a 5 minutes without connection, the smartphone gets lost does not know what it does. After long minutes he can connect, but always deactivating and activating the device wifi. I already read about the Meraki guaranteeing better performance with 3 SSIDs using group polices, okay. But is it allowed to create 11 SSIDs by which they indicate use only 3? It would buy a ferrari and ride only 100km / h instead of 400km / h. Anyway, what I just did at that moment is: Excludes Vlan 4 (smartphones). I put all my smartphones in Vlan default SSID 1 and made group rules polices for network security not to have total TCP communication with my LAN. I own that now. Vlan default = SSID 1 Vlan 2 = SSID 2 Vlan 3 = SSID 3 Vlan 5 = SSID 5 (hidden) This Vlan 5 would only be for management devices in which I am already thinking about creating a new polices group for them and joining everyone in the default Vlan and thus eliminating Vlan 5. So I would abide by the Meraki documentation using 3 SSIDs on the maximum. And after all this if the problem continues? Do you think I'm making a mistake in everything I've just documented? Thank you. Pedro
... View more
Dec 12 2017
8:44 AM
@LeoG This is the screen of my AirMarshal. I receive yes emails from Rogue Ap in which Meraki himself makes this block and I enable the keywords to put keywords. But I keep looking around the available networks thinking about this, but I find nothing. And Meraki can not be so sensitive this way these days, right? Each block has 50 networks available and if you think the world could only exist Meraki. And this problem though that is more often when roaming it also happens when I am sitting at my desk. I will get my smartphone to make a VOIP connection and I find that I am without a network. Actually this is extremely frustrating I was expecting too much from Meraki, but it's not working. As I said above, I'm already talking to the supplier, because I have no outputs. Pedro.
... View more
Dec 12 2017
7:53 AM
@Donnie I also use the MR33. And I have the same problems. There is no solution or they simply take over the problem or change the solution. See this post is just that. https://community.meraki.com/t5/Wireless-LAN/Constant-association-disassociation/td-p/2772 Good luck. Pedro
... View more
Dec 12 2017
7:09 AM
@PhilipDAth Is there any configuration so I can limit users to an AP? Or would it be signal distribution and plant planning? Pedro.
... View more
Dec 12 2017
6:56 AM
@alyssafriesen Here, too, I go through this. There is no explanation or solution to this case. I have already contacted the manufacturer and supplier and if there is no solution we will exchange the solution. Because that way it does not work. Did you find any solution out there? Pedro.
... View more
Dec 7 2017
12:17 PM
Guys, I'll explain my scenario here and I'd like to know if the polices group can help me in this case: SSID 1-> Vlan 1 - Administrative users; SSID 2-> Vlan 2 - Users only browsing 3 different times on the same day; SSID 3 -> Vlan 3 - VOIP Users; SSID 4 -> Vlan 4 - Users only board; SSID 5 -> DHCP Meraki. Visiting users registered for browsing. ___________________________________________________________________ Note that these VLANs are just for networks not to talk and of course I have any or deny rules for some situations. Solution: I would like to decrease the SSID number. But how could I do this using the police group? For example: Vlan1, 3, and 4 devices can not talk. How to make layer 3 and 7 rules? Could someone give me an idea? Thank you ! Pedro Constantino
... View more
Dec 7 2017
11:53 AM
@Rudi @PhilipDAth Yes, I detected my problem. This being the rogue AP. Some HP printers I own were with direct wifi enabled and thus causing interference. One thing I noticed seems to me that this is a meraki pattern since other manufacturers do not happen this to fall for a rogue AP. Finally, I gradually learn more about Meraki concepts. Thank you ! Pedro.
... View more
Nov 23 2017
2:52 AM
In reality they are devices already connected and authenticated. These events are causes during the full-time work. It is not necessarily effect because of roaming, as often the user himself is sitting at his desk. I will show below a better visualization. I still can not interpret the cause technically.
... View more
My Accepted Solutions
| Subject | Views | Posted |
|---|---|---|
| 21464 | Dec 7 2017 11:53 AM |
My Top Kudoed Posts
| Subject | Kudos | Views |
|---|---|---|
| 7 | 13193 | |
| 3 | 15669 | |
| 2 | 25875 |
© 2024 Cisco Systems, Inc.
