Meraki Community

Opportun · ‎Jan 8 2019

My 2019 New Year’s Network Resolutions are: Selling/installing larger full stack clients projets including cameras Leveraging existing Meraki clients to refer clients and potential projects Demonstrate how easy network problems can be identified and resolved using Meraki Dashboard

Opportun · ‎Dec 12 2017

Just want to confirmed that the "Ready" state means that an IP/DHCP address is assigned to the WAN2 but by no means the WAN2 internet connection is tested by the MX router. I asked my clients to visually check every day if the 4G/LTE USB key light is on (blue or green). This is the only way to make sure that the internet connection is working. Would be great if the WAN2 port would be automaticaly tested regularly by the MX device to make sure it's working fine.

Opportun · ‎Oct 17 2017

I have several clients using a WAN 2 internet connection throughout a Cradlepoint router and a USB LTE key on their MX60-64-65. Such approach allow them to have a sleeping internet connection that is not very expensive (the USB key can use a data sharing plan with other devices). The question is: If the WAN 2 status is "Ready" in the dashboard, does that mean that the internet connection is active and working? Does the MX device test the internet connection on WAN 2 all the time to make sure it's working? Thanks in advance.

Meraki Community

About Opportun

Opportun

Community Record

Badges

Re: Happy New Year! What are your Network Resolutions?

Re: MX WAN 2 internet "Ready" status

MX WAN 2 internet "Ready" status

Re: Happy New Year! What are your Network Resolutions?