Hi Philip,   The fact that the switch IP needs to be on the uplink VLAN is a great point.  Do you have a documentation link for that?  I tried to find one and couldn't.   Thanks!   Tom ... View more

You're welcome!   If you are interested in my Python script, send your email to me in a direct message. ... View more

Hi @ChristianCa  and @JonH ,   I ran into this same problem retrieving licenses for my clients.   You can get license info for co-term licenses with these URLs depending on your version: https://api.meraki.com/api/v0/organizations/{organizationId}/licenseState https://api.meraki.com/api/v1/organizations/{organizationId}/licenses/overview   For my script, I get the initial list of orgs, and then for each organization I check org_dict['licensing']['model'] == 'co-term'.  (The var org_dict is my own.)  If it matches, I use the co-term URL, else I use your URL to get the license info.   Thanks,   Tom ... View more

I have an update on this thread.   The Test button does not work with NPS.  It appears not to use PEAP and MS-CHAPv2, or maybe it is a TLS issue as described earlier.  I don't want to modify the registry and enable TLS 1.0 or 1.1. The WiFi client DOES work.  So, keep that in mind when using the Test button. ... View more

Great question.  Some content filtering vendors have an "uncategorized" or "unknown" category.  There may be a reason Meraki has not added that category, e.g. too many false positives.  With regard to DGAs and instant malware sites, I think this would be a good solution.   Also, Brightcloud does not define the category Open HTTP Proxies.  I ask because I want to know if it is something I should block similar to Proxy Avoidance and Anonymizers. ... View more

The secondary DNS of 8.8.8.8 worked for me.  Thanks!  In this case it was a new firewall that was connected and disconnected, but never configured. ... View more

To reply to my own post, we just used a different IP address for the new device.  We changed the next hop on the MX.  We did not reboot the MX in a maintenance window in order to clear the ARP cache. ... View more

That is inexcusable.  I am replacing another vendor with a Meraki switch that connects to an MX.  We will have to reschedule to off hours just so I can reboot the MX to clear the ARP table. ... View more