is this answer still valid and that kind of setup is also not working with MS425? ... View more

Thank you. I have 'Cisco Identity Services Engine (ISE) Authentication' ticked under splash page and everything worked perfectly till today...   ... View more

Do you have the instructions to implement wired 802.1x with dynamic VLANs ? Appreciate your help  ... View more

ps. Your are probably experiecing port block issues due to the switch spanning tree priority.  If you forcibly make CSW1 the root (for example by giving it a priority of 0) and CSW2 the backup root (for example by giving it a priority of 4096) then it will probably be happier.  You should do this anyway on your core switches for stablity reasons. https://documentation.meraki.com/MS/Other_Topics/Switch_Settings#Setting_the_STP_Root_Bridge ... View more

It is typical for 4G carriers to run the default APN through a firewall and block new inbound traffic by default.   Typically you need to change the APN to one that does not run via a firewall, or at a minimum, allows inbound traffic. ... View more

checked, VPN is marked Yes but unable to ping MX to MX devices.. ... View more