Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Register or Sign in
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
- About Cloggs
About Cloggs
Cloggs
Comes here often
Member since May 14, 2019
Jun 23 2021
Community Record
7
Posts
0
Kudos
0
Solutions
Badges
May 24 2019
3:10 PM
Thanks all for your input, I ended up using separate switches for DMZ and LAN, all working nicely.
... View more
May 18 2019
10:54 AM
Thanks I will try a single Trunk next week. I have not had a problem with my existing SonicWall firewall, can't see how this can be a STP issue with separated VLAN's unless the MX100 doesn't like being connected like this to the same switch.
... View more
May 14 2019
1:56 PM
No, Port two on the MX connects to one VLAN and port three connects to the other VLAN on a single switch. The switch is in layer 2 mode with no routing between VLAN's. In Scenario 1 I have packet loss, in Scenario 2 I don't Scenario 1 - Packet loss Scenario 2 - No packet loss using two switches A bit of additional information; I currently have an old SonicWall in the same configuration with no packet loss.
... View more
May 14 2019
5:52 AM
Hi WW That's exactly what I was thinking. STP is enabled on all switches, no loops detected. I like the idea of a trunk port, I hadn't considered that as there are plenty of spare ports on the MX, I currently have the ports on the MX and the Netgear switch configured as Un-trunked ports. However changing the setup doesn't explain the Ping drops. :-(, I like to know why something doesn't work as it should. I will try you suggestion.
... View more
May 14 2019
5:42 AM
I did see that article thanks. Packet loss in my instance always occurs at the same time, I ping google DNS, I ping an Address on VLAN 100 and VLAN 200, When packets are being dropped it occurs at the same time for all three pings. The strange thing is that if I connect my VLAN 200 to a separate switch with nothing else connected to that switch I don't loose a single packet.
... View more
May 14 2019
4:17 AM
Hello I have a strange problem that I have not been able to resolve, yet. My scenario is very simple, One MX100 and a Netgear switch with 2 VLANS (no routing on the switch), all traffic has to pass through the MX100 On the MX100 I have two subnets relating to the VLANS on the Netgear switch, lets say VLAN 100 and VLAN 200 for clarity VLAN 100 uses port two on the MX100 VLAN 200 uses port three on the MX100 The problem I have when all is connected is constant packet loss, after every 10-15 pings I have a few dropped packets. With only VLAN100 connected all is well, I can ping devices on VLAN100 and the Internet without a single packet being dropped, I can do the same for VLAN200. But not when I connect both of them at the same time. If I use a separate switch for VLAN200 instead of two VLANs on a single switch I have no dropped packets. Can anybody tell me what's going on as I'm rather confused. 🙂
... View more
© 2024 Cisco Systems, Inc.
