Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
About FernandoC
FernandoC
Comes here often
Member since Oct 2, 2017
Jan 24 2024
Community Record
6
Posts
0
Kudos
0
Solutions
Badges
Hi, i did test it both ways. In fact the first test was (by mistake) with 17.0.0.0/8, captive.apple.com, *.apple.com,... in the walled garden- which didn't trigger the redirection to the splash page, as expected. Then we took everything out and left only the IP address and URL of the ISE. Since then the redirection works (as you can see in the screenshot on my first post). The problem is that the iPhone doesn't finish the TLS handshake. Thanks,
... View more
Hi, no they weren't. Only the ISE is being allowed on the Walled Garden. I am wondering why does the client finishes the connection after having seen the server certificate. I did another trace with an iPhone on a test system based on catalyst APs. There everything goes fine- after the ISE has sent its certificate, the client sends its own, and the splash page is downloaded as expected. Thanks
... View more
Hi, i have at a customer site one WLAN based on Meraki. We have three SSIDs configured: two corporate and one for guests. For the three SSIDs the authentication/authorization policies are enforced by the ISE (v3.3). The users attempting to get access to the "Guest" SSID are redirected to a splash page on the ISE where they should accept the non disclosure agreement to have access granted to the internet (typical "hotspot"). The setup works correctly as expected with PCs, but not with an iPhone. There the splash page doesn't get displayed at all. The Walled garden is correctly configured, we can see the redirection on a trace. Looking at the trace we can see that after the server (ISE) has exchanged its certificate, the iphone acknowledges and closes the connection (screenshot appended). I have tested a similar configuration on a test environment, in which instead of a Meraki AP i have a Cat9105 AP and it works fine with Iphone and Ipad. any Ideas? Thanks in advance, Fernando
... View more
Labels:
- Labels:
-
Other
Oct 2 2017
2:26 PM
Hi, thanks. Must look deep at it, to decide how to remove an eventual summary... would there be a workaround (to avoid removing the summary)? Fernando
... View more
Oct 2 2017
10:53 AM
Hello, i am trying to create one network for a Z1 appliance that should be installed in a remote site of our company. There is a template we use for these installations. When I try to create the network (associated with the template, I get the message "Failed to autogenerate 1 unique subnet for VLAN 'Default' : subnet pool '/24 from 10.0.0.0/8' has 0 subnets available". There are currently less than 40 subnets used. Has anyone an idea about the cause for this message? Thanks in advance, Fernando
... View more
© 2024 Cisco Systems, Inc.
